3. CONCRETE PLINTH SLAb4. TOOLS REQUIREDConcrete Slab: It is recommended that your new shed is secured to a concrete slab as shown below.Please ensure that your site is level. It is recommended that your slab is 100mm thick, you use a plasticmembrane and a suitable reinforcing mesh. We recommend that you make your slab 100mm bigger than thebase dimensions of your shed. This will allow for a 50mm edge around your shed. We recommend that youslope the 50mm edges downward by 10mm so that rain water will drain away from your shed.5. CONTENTSCheck contents: Lay out all components with the part numbers facing upwards and check off against the partslists on the next four pages. In the unlikely event of a missing component please contact you local Sealey dealer.GSS150819SD Issue: 1 - 20/08/12Original Language Version© Jack Sealey Limited

Sealey Power Products GSS150819SD Instructions Manual

Product

Learn More

Legal