Sealey PHA100 Instructions Manual

2-STROKE PETROL EARTH AUGERMODEL NO: PHA100Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY1.1. GENERAL SAFETY WARNING! THIS MACHINE MAY CAUSE SERIOUS INJURIES. Read the instructions carefully for handling, preparing,maintaining, starting, stopping and operating the machine. Learn about all the controls and proper use of the machine. WARNING! When using this type of tool, basic precautions should always be followed to reduce the risk of fire, electric shock andinjury.9 Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operationsdescribed in these operating instructions.9 This product must be operated only by experienced users.9 If you are giving this machine to others, please also provide them with this instructions manual.9 Use this machine as described in this instruction manual. It is strictly forbidden to use this tool for applications other than thosedescribed in this manual.9 Failure to follow these instructions can result serious injuries or death.9 Never let people unfamiliar with these instructions or children use this product.9 Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property.8 DO NOT use the tool if you have consumed alcohol, are tired, under the influence of drugs or ill. DO NOT use the tool if you are notin an adequate physical condition.9 This tool is intended for outdoor use. Never use it indoors.9 Never allow children use the machine.9 Dress properly! DO NOT wear loose fitting clothing or jewellery that can be caught in moving parts. Use of resistant gloves, non-slipshoes and safety glasses is recommended; stop the engine or disconnect it before:cleaning or clearing a blockage;checking, maintaining, or working on the machine;when adjusting the working position of the cutting device.9 Never add fuel to a machine with a running engine or when it’s hot. DO NOT inhale fuel fumes as they are toxic.9 Always inspect the machine before and after operation.8 DO NOT attempt to repair the machine unless you are qualified to do so. Repairs should be carried out only by an authorized servicecentre or a similar qualified specialist.8 DO NOT use the machine with a damaged or excessively worn cutting device.9 To reduce the risk of fire, keep the engine and exhaust free from debris, leaves or excessive lubricant.9 Always make sure that all handles and guards are installed when operating the machine.9 Never attempt to use an incomplete machine or a machine equipped with an unauthorized modification.9 When transporting or storing the machine, always original packaging for device protection.9 Always be aware of your environment and pay attention to possible dangers that cannot be heard due to the noise of the machine.9 Keep people and animals away from the work area. Children and people who do not know how to use this tool should not touch itand handle it.9 Use the product only under daylight or under good artificial light.9 When using the machine, always wear full protective equipment including a helmet, protective mask, ear protection, gloves, non-slipfootwear and protective clothing.9 Wear appropriate clothing. DO NOT wear loose or unbuttoned shirts. DO NOT wear jewellery that may come in contact with movingparts. If you have long hair, tie them down and wear an appropriate safety helmet.8 DO NOT operate the product with damaged guards or shields not in place.9 Keep hands and feet away from the unit at all times, especially when turning the tool off and on.8 DO NOT use the tool in an area where ventilation is poor. Gas emissions can cause injury.8 DO NOT use the tool when it’s raining or during bad weather. DO NOT use the tool in damp locations.8 DO NOT use the tool in the presence of flammable liquids or gases. WARNING! The machine releases gases when it is used. Avoid coming into contact with these gases.9 Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could cause accidents.9 Survey the area to be worked prior to starting to avoid hitting underground services i.e. electricity cables, phone lines etc.9 Keep the tool and drill clean for better and safer performance. Follow the instructions in this manual to lubricate and change theaccessories.9 Turn off the tool after use, when you leave it unattended, when changing the accessories and before servicing.PHA100 Issue 2 (3,4) 17/09/21Original Language Version© Jack Sealey LimitedRefer toinstructionsHot surfacesWear eyeprotectionWear protectiveglovesWear earprotectionWear safetyfootwearWear protectiveclothingWarning:Flammable liquid

/ 5

Related manuals for Sealey PHA100