Sealey LINK MONKEY Instructions Manual

INSTRUCTIONS FORLINK MONKEY - CHAIN BREAKERSKU: M027Thank you for purchasing a Tru-Tension product. Manufactured to a high standard, this product will, if used according to these instructions, and properlymaintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH ITIS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Refer toinstructionsWear protectiveglovesWear safetyfootwaer1. SAFETYWARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools and equiptment.• DO NOT use if damaged.• Maintain in good and clean condition for best and safest performance.• Keep the work area clean, uncluttered and ensure there is adequate lighting.• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.• Keep children and unauthorised persons away from the work area.• Ensure that the motorcycle is safely positioned and secured2. INTRODUCTION3. SPECIFICATIONMODEL M027CONTENTS Pins: 2.2mm, 3.2mm, 4.0mm & 5.0mm Press PlatesPin Guide: 2.2mm, 3.2mm, 4.2mm & 5.2mm LeverAnvil: 3.2mm & 6mm HandleRivet Set Chain PressSpring© Copyright Tru-Tension LTD4. OPERATIONPRESSBODYHANDLEALIGNMENT BOLTLEVERBREAKING TIPS2.2mm, 3.2mm, 4mm & 5mmPUSH (EXTRACTOR) BOLTPRESS GUIDE PINS2.2mm, 3.2mm, 4mm & 5mmRIVET SET fig. 1Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #420 to #530. Supplied with a range of pins, dies and detailed instructions.

/ 2

Sealey LINK MONKEY Instructions Manual

Product

Learn More

Legal