Sealey LED100WS Instructions Manual
20W COB LED R/ChaRgE WiRELEssspEakER WORk Light+pOWER BankModel no: LED100Wsthank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.iMpORtant: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safEty9 Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn ordamaged DO nOt use.9 ensure the lamp is fully charged before initial use.8 DO nOt charge in damp conditions.8 DO nOt turn the lamp on when it is being charged.8 DO nOt shine directly into your, another person’s or an animal’s eyes.8 DO nOt allow children to use the lamp.8 DO nOt handle or move the lamp whilst it is being charged.8 DO nOt use the lamp if you suspect that the battery or the lamp casing is damaged.8 DO nOt leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequentlyrecharge the battery at least once every six months of non-use.8 DO nOt attempt to open, disassemble, modify or service the battery pack.8 DO nOt crush, puncture, short external contacts or dispose of in fire or water.8 DO nOt expose to temperatures above 60°C (140°).9 Replace only with the battery pack designated for this product.9 Recycle or dispose of used battery as stipulated by local regulation.9 If the electrolyte in the cells gets on your skin or eyes, rinse thoroughly with water.8 DO nOt connect your small devices to charge while the power bank is in the process of charging.8 DO nOt immerse in water.8 DO nOt place near a fire or any other source of intense heat – battery could explode if heated.9 Battery must be recycled or disposed of according to local regulations.2. intRODuCtiOn3-in-1 Function work light made of a strong nylon plastic with thermoplastic rubber edges for durability. Features an ultra bright 20W CoB ledlight producing up to 1100 lumens with three light settings: High 1100lm, Mid 580lm, low 350lm (working time: 3, 5 and 15 hours respectively).Work light also includes two good quality wireless speakers which can be easily linked to your tablet or smartphone. Fixed to the rear is asturdy 180° adjustable stand which can also be used as a carry handle. Has four strong magnets on the back for easy mounting to metalapplications such as a tool chest. Built-in power bank with a USB output and led charge indicator. Micro USB charging lead included.3. spECifiCatiOnModel no: ............................................................led100WSBattery: ........................................................3.7V 8Ah li-polyCharging Time:.............................................................8-10hrled Qty: ........................................................ 20W CoB ledlumen output: ............................................................1100lmnett Weight: ................................................................... 790gRunning Time: ..............................................................3-15hrSpeaker output: ............................................................. 85dbUSB output: ............................................................... 5V / 1ASpeakerLightfig.1led100WS Issue 1 20/02/19Original Language Version© Jack Sealey limitedRefer toinstructions |
Related manuals for Sealey LED100WS
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved