Sealey FDT3.V2 Instructions Manual

Also see for FDT3.V2: Instructions

Fold down Telescopic TresTle 200kgcapaciTyModel no: FdT3.V2Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.iMporTanT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. saFeTy9 Familiarise yourself with this products application and limitations, as well as the specific potential hazards attributed to the trestle.9 Maintain the trestle in good condition.9 Replace or repair damaged parts. Use recommended parts only. non authorised parts may be dangerous and will invalidate thewarranty.9 Keep the trestle clean for best and safest performance.9 locate the trestle in a suitable working area for its function, keep area clean, tidy, free from unrelated materials and ensure there isadequate lighting.9 ensure the workpiece is correctly secured on the trestle/trestles before commencing work activity.9 Maintain correct balance and footing. ensure the floor is not slippery and wear non-slip steel toe-capped shoes/boots.9 Keep children and unauthorised persons away from the working area.8 do noT use the trestle for any purpose other than that for which it is designed.8 do noT make any modifications to the trestle.8 do noT operate the trestle if any parts are missing or if the “over centre” locking links are not in the correct positions.8 do noT exceed the rated capacity of the trestle.8 do noT stand on the trestle or use as a platform.9 When not in use, stand or store in a safe, dry location. warning! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations thatmay occur. It must be understood by the operator that common sense and caution are factors which cannot be built into thisproduct, but must be applied by the operator.2. inTroducTionManufactured from square section steel tube the trestle is ideal for supporting large/long workpieces when cutting, drilling etc. Trestle beamhas seven-position height adjustment and includes pivoted end stops to retain the workpiece. legs fold in for easy transportation and storage.3. speciFicaTionModel no: ................................................................FdT3.V2Beam Width: .............................................................. 690mmCapacity: ...................................................................... 200kgFolded (W x d x H): ................................680 x 150 x 840mmHeight Adjustment: ............................................ 800-1300mmUnfolded (W x d x H): .............................680 x 580 x 800mmnett Weight: ..................................................................... 6kgFdT3.V2 Issue 3 (HF) 10/12/18Original Language Version© Jack Sealey limitedRefer toinstructionsWear eyeprotectionWear protectiveglovesWear safetyfootwear

/ 3

Related manuals for Sealey FDT3.V2