Sealey DC2412 Instructions Manual

INSTRUCTIONS FOR:CONVERTER 24V TO 12V DC 15AMODEL NO: DC2412 WARNING! DO NOT use on any vehicles other than those with 24V DC systems. DO NOT connect to any AC power source. DO NOT exceed the rated load of 15A. DO NOT dismantle. The converter must be checked by qualified service personnel only . DO NOT obstruct the vents in the casing; allow cooling air to flow through the unit. DO NOT get converter wet or use in damp or wet locations or areas where there is condensation. DO NOT use for any purpose other than for which it is designed. DO NOT operate the converter if damaged. When not in use store inverter in a safe, dry, childproof location.1. SAFETY2. INTRODUCTION3. SPECIFICATIONIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCTCORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILLINVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.Refer to InstructionsSuitable for commercial vehicles with 24V DC battery supply. Converts down to 12V DC 15A vehicle accessory output. Features a low and highvoltage alarm for added protection. Additionally includes a 5V USB outlet. Supplied with 550mm accessory connection lead.Model No:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC2412Input Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VOutput Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VOutput Amperage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15ADimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 x 85 x 50mSupply Connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessory Connector Plug© Jack Sealey Limited DC2412 Issue:1 - 07/11/14Original Language Version

/ 2

Related manuals for Sealey DC2412