Sealey ARB120 Instructions Manual

1. SAFETY INSTRUCTIONS2. INTROdUCTION & SpECIFICATIONS dO NOT use the roof bars if any parts are missing or damaged as this may cause failure or possible personal injury. WARNING! Owing to the variety in design of vehicles it is the user's full responsibility to ensure no damage occurs whilst using theseroof bars. Correct attachment to a vehicle is therefore critical and is beyond control of the manufacturer, distributor, or supplier. WARNING! The user must secure the roof bars properly, checking the security frequently when in use. WARNING! Avoid any protrusions beyond the side of the car as these may present a risk of injury to passers-by. dO NOT use the roof bars for any purpose other than for which they are designed. WARNING! Drive carefully - Be aware of cross winds, sudden braking or hard cornering, reduce speed accordingly when roof barsare fitted WARNING! These roof bars are designed for temporary use only, remove when not in use or before going through a car wash. Before every use check the bars for security of fittings or any sign of wear and tear. Replace any worn or damaged parts. Check the load is stable before moving off. Be cautious of the load height and restrictions of the route(s) you will be taking. dO NOT exceed the weight limit stated in the specifications or the vehicle handbook, whichever is lower. WARNING! Remember the driver of the vehicle is responsible for the security and safety of the load carried.INSTRUCTIONS FOR:ALUMINIUM ROOF BARS 1200, 1350MM FORTRAdITIONAL ROOF RAILS 90kG MAX LOAdMODEL Nos: ARB120, ARB135Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions andproperly maintained, give you years of trouble free performance.IMPORTANT: pLEASE REAd THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OpERATIONAL REQUIREMENTS, WARNINGS, ANdCAUTIONS. USE THIS pROdUCT CORRECTLY, ANd WITH CARE FOR THE pURpOSE FOR WHICH IT IS INTENdEd. FAILURE TO dO SOMAY CAUSE dAMAGE ANd/OR pERSONAL INJURY ANd WILL INVALIdATE THE WARRANTY.Aerodynamic aluminium roof bars to fit onto traditional roof rails, complete with anti-theft locks. Available in two lengths to suit mostvehicles fitted with traditional roof rails up to 58mm wide. Maximum load capacity 90kg.Model No: . . . . . . . . . . . . . . . . . . . . ARB120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARB135Overall Length: . . . . . . . . . . . . . . . . . 1200mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1350mmMaximum Load Capacity: . . . . . . . . . . . . 90kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90kgARB120,ARB135 Issue:1 08/01/14Original Language Version© Jack Sealey Limited

/ 2

Related manuals for Sealey ARB120