Sealey APMSHFP Series Instruction Manual

10pc garage storage systemmodel no: apmsHFp serIesthank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.ImportaNt: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. saFety WarNINg! ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this storagesystem.9 locate in a suitable work area.9 Keep the work area clean, uncluttered and ensure there is adequate lighting. WarNINg! Use storage on level and solid ground, preferably concrete.9 Keep the storage system clean and tidy in accordance with good workshop practice.9 Keep children and unauthorised persons away from the work area.8 Do Not use the storage system for any purpose other than that for which it is designed.8 Do Not use the storage system outdoors.8 Do Not place the storage system in a damp or wet location or an area where there is condensation.8 Do Not clean the storage system with any solvents which may damage the surfaces or the protective coating.88 88 Do Not move the storage system when there are items placed inside.88 88 Do Not step on the shelves.88 88 Do Not8overload the storage system.2. INtroDuctIoNCan be free standing or fixed to the wall. All ten units supplied on a single pallet. Hinged flat pack design makes this storage system easy andquick to assemble. Base units fitted with stylish black MDF worktops and adjustable feet. Fitted with ball bearing drawer runners and magneticdoor latches. Pegboard design backing panels for additional storage. Extra units available to extend the storage system if required. Some simpleassembly required.3. specIFIcatIoNmodel no: .........................................................apms10HFpGarage storage system 10pcoverall size: ........................................ 3100 x 460 x 2080mmInner drawer dimensions: ........................670 x 398 x 122mmmodel no: ...........................................................apms2HFpmodular wall and base cabinetmodel no: ........................................................ apms2HFpDmodular wall and base cabinet with drawermodel no: ........................................................ apms2HFpsmodular stacking cabinetAPMSHFP series | Issue 1 21/10/19Original Language Version© Jack Sealey limitedRefer toinstructionmanualWearprotectivegloves