Sealey AP28104BWS Instructions Manual

Also see for AP28104BWS: Instructions

INSTRUCTIONS FOR:TOPCHEST 4 DRAWER RETRO, ROLLCAB 4 DRAWERRETRO - BLUE WITH WHITE STRIPEMODEL No's: AP28104BWS, AP28204BWS1. SAFETY2. INTRODUCTION3. SPECIFICATION1.1 GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulationsare adhered to when using this product. WARNING! Use caution when handling and assembling the metal components. The metal mayhave sharp edges or corners, the use of protective gloves is recommended. DO NOT open more than one drawer at a time. DO NOT step on the drawers. DO NOT let children play with the roll cab or top chest. Ensure all drawers are fully closed and the self locking catch is activated, before moving the toolbox. Secure the brakes when rollcab is in the desired position. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep the mounting frame clean and tidy in accordance with good workshop practice. DO NOT use in damp work areas. WARNING! The warnings, cautions and instructions referred to in this instruction manual cannotcover all possible conditions and situations that may occur. It must be understood that commonsense and caution are factors which cannot be built into this product, but must be applied by theoperator.4. ASSEMBLY4.1. Roll Cab Handle Installation.Position the handle over the holes in the roll cab, attach using the M6 x 12mm hex boltsand tighten securely (fig.1). Assembling the handle first will make it easier to handle thethe roll cab.4.2. Castor Installation.4.2.1. Lay the roll cab carefully on its back, protecting it with a soft mat placed on the floor.4.2.2. Position the two rigid castors at the end opposite the handle.4.2.3. Insert the M8 x 20mm hex bolts through the washers, then through the castors and intothe base of the roll cab, tightening securely.4.2.4. Repeat with the two swivel castors on the opposite (handle) end.4.3. Roll Cab and Top Chest Connection.4.3.1. Place the top chest onto the roll cab.4.3.2. Snap the connectors into the square holes on the back of the top chest (fig.3.).4.3.3. Fasten the connectors with the screws provided.fig.1fig.2fig.3AP28104BWSRetro styled top chest with modern day functionality. Features 4 drawers with 45kg ballbearing slides and aluminium trimmed lift latch drawer pulls preventing inadvertent opening.Chest is further enhanced with gas strut supported opening clam shell top providingadditional storage. Retro theme is continued with colour scheme of racing blue with a vinylwhite stripe and recessed chrome side handles. Drawers and top lid are fitted with drawerliners and lock on one key turn. For use with with AP28204BWS Rollcab and AP28102BWSMid-box to make a complete retro style stack unit.AP28204BWSRetro styled rollcab with modern day functionality. Features 4 drawers with 45kg ball bearingslides and aluminium trimmed lift latch drawer pulls preventing inadvertant drawer opening.Retro theme is continued with colour scheme of racing blue with a vinyl white stripe and styl-ish heavy duty casters, two with brakes. All drawers are fitted with liners and lock on one keyturn. For use with AP28104BWS Topchest and AP28102BWS Mid-box to make a completeretro style stack unit.Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AP28104BWS . . . . . . . . . . . . AP28204BWSOverall Dimensions (W x D x H):. . . . . . . . 700 x 450 x 495mm . . . . . . . . 730 x 460 x 825mmMedium drawer (x 4): . . . . . . . . . . . . . . . . . 570 x 400 x 60mm . . . . . . . . . . . . . . . . . . . . . n/aClam Shell Top: . . . . . . . . . . . . . . . . . . . . . . 590 x 430 x 80mm . . . . . . . . . . . . . . . . . . . . n/aLarge drawer (x1): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a . . . . . . . . 570 x 400 x 105mmLarge drawer (x3): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a . . . . . . . . 570 x 400 x 135mmThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCTCORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILLINVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Shown with Mid-boxModel no: AP28102BWSAP28104BWS, AP28204BWS Issue: 2- 22/09/17Original Language Version© Jack Sealey Limited

/ 2

Related manuals for Sealey AP28104BWS