Sealey AP2406 Instructions Manual

Also see for AP2406: Instructions Instructions Instructions Instructions Instructions

instructions forrollcabs 6-10 drawermodel no’s: aP2406, aP2408, aP2410Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. saFeTY warNING! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this product.8 do NoT open more than one drawer at a time.8 do NoT step on the drawers.8 do NoT let children play with the roll cab.9 ensure all drawers are fully closed and the self locking catches are activated, before moving the toolbox.9 secure the brakes when rollcab is in the desired position.9 Keep the work area clean, uncluttered and ensure there is adequate lighting.8 do NoT use in damp work areas. warNING! the warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions andsituations that may occur. it must be understood that common sense and caution are factors which cannot be built into this product, butmust be applied by the operator.2. INTroducTIoNHeavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance andcarry heavier loads. Each drawer fitted with catch to prevent accidental opening when being transported around the workshop. Added securityprovided by side mounted cylinder lock, supplied with two keys. rubber grip side handles for comfort and ease when manoeuvring. rust andsolvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage. Features twoØ125mm swivel castors with large toe locks and two fixed wheels. Tough composite top for fitting and securing top box or can be used as aworkstation. Unique design fitted with perforated side panels for hanging tools and accessories.3. sPecIFIcaTIoNOriginal Language Version© Jack sealey limitedrefer toinstructionmanualmodel no AP2406 AP2408 AP2410overall sizeWidth 765mm 765mm 765mmdepth 465mm 465mm 465mmHeight 960mm 960mm 960mmdrawers (Qty)medium 3 6 10large 2 2X - Large 1drawer Width 535mm 535mm 535mmdrawer depth 390mm 390mm 390mmdrawer Height (medium) 60mm 60mm 60mmdrawer Height (large) 130mm 130mmDrawer Height (X - Large) 195mmAP2406, AP2408, AP2410 Issue:4(F) 23/04/18

/ 2

Related manuals for Sealey AP2406