Sealey AP1372B Instructions Manual

instructions forworkstation with 3 drawers & cupboardmodel no: ap1372bthank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safety warninG! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.9 locate bench in a suitable working area.9 Keep the work area clean, uncluttered and ensure there is adequate lighting. warninG! use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.9 Keep the bench clean and tidy in accordance with good workshop practice.9 Keep children and unauthorised persons away from the working area.8 do not use the bench for any purpose other than that for which it is designed.8 do not exceed maximum capacity of workbench.8 do not undertake work on the bench without the work piece being adequately secured. use clamps or a vice (not included) to secure thework piece. Available from your sealey dealer.8 do not use the bench out of doors.8 do not get the bench wet or use in damp or wet locations or areas where there is condensation.8 do not clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.2. iintroductionHeavy duty powder coated metal frame with a 40mm MDF work surface. Two configurations available with a combination of lockable drawersand cupboards. Features adjustable feet to help stability when placing on an uneven surface. Supplied flat packed with two keys.3. specificationmodel no: ................................................................ AP1372Bsize (W x d x H):...................................1200 x 600 x 865mmdrawer (x3): ............................................415 x 160 x 415mmcapacity: ...................................................................... 300kg4. contents4.1. panels etc.AP1372B | issue 1 07/04/16Original Language Version© Jack sealey limitedrefer toinstructionsPart description QuantityA top 1B1 left side 1B2 right side 1c Bottom 1d support 1e drawer 3f1 door 1g shelf 1H Back 2i leg leveller assy. 4J1 left slide 3J2 right slide 3

/ 4

Related manuals for Sealey AP1372B