Sealey AP1100M Instructions Manual

INSTRUCTIONS FOR:MOBILE WORKBENCH 2-LEVELMODEL NO: AP1100MIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCTCORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILLINVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructionsand maintained properly, give you years of trouble free performance.1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench. Locate bench in a suitable working area. Keep the work area clean, uncluttered and ensure there is adequate lighting. WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface. Always apply the brakes to the locking castors before using the bench. Keep the bench clean and tidy in accordance with good workshop practice. Keep children and unauthorised persons away from the working area. DO NOT place heavy loads on the lower shelf. DO NOT use the bench for any purpose other than that for which it is designed. DO NOT carry out any work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to securethe workpiece (available from your Sealey dealer). DO NOT use the bench outside. DO NOT get the bench wet, or use in damp or wet locations or areas where there is condensation. DO NOT clean the bench with any solvents which may damage the paint surface. WARNING! This workbench is heavy and assistance should be obtained before assembly.2. INTRODUCTIONSturdy steel construction workbench with a capacity of 300kg. Two shelves that allow unobstructed access. Fitted with two fixed castors, twolocking castors and a heavy-duty handle.3. SPECIFICATIONModel No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AP1100MSize incl. Handle (W x D x H): . . . . . . . . . . . . . . . . . . . . . . .1180 x 700 x 830mmWork Surface (W x D): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1100 x 700mmCapacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300kgAP1100M Issue: 1 - 05/11/15© Jack Sealey Limited Original Language Version

/ 2

Related manuals for Sealey 5054511050523