Sealey AP02DFC Instruction

INSTRUCTIONS FOR:2 DOOR FLOOR CABINETMODEL No: AP02DFC1. SAFETY INSTRUCTIONS2. INTRODUCTION1.1 GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practiceregulations are adhered to when using this cabinet. WARNING! Use caution when handling and assembling the metal components. The metal mayhave sharp edges or corners, the use of protective gloves is recommended. Locate cabinet in a suitable working area and secure to a wall with suitable fasteners. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep the cabinet clean and tidy in accordance with good workshop practice. Keep children and unauthorised persons away from the working area. DO NOT climb, step or stand on the cabinet shelves. DO NOT use the cabinet for any purpose other than that for which it is designed. DO NOT exceed the maximum weight allowance for each shelf, 45kg (100lbs). DO NOT use in damp work areas. WARNING! The warnings, cautions and instructions referred to in this instruction manual cannotcover all possible conditions and situations that may occur. It must be understood that commonsense and caution are factors which cannot be built into this product, but must be applied by theoperator.Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASEKEEP INSTRUCTIONS SAFE FOR FUTURE USE.AP02DFC Issue No: 1 - 06/08/08Metal storage cabinet with silver-grey doors and graphite grey carcass, features three shelves,which can be easily adjusted and lock with two keys.Overall Size (W x D x H): 762 x 381 x 1666mmFig.13. ASSEMBLY3.1 CONTENTS INSPECTIONUnpack all the parts and layout on the packing material. Visually inspect all panels tocheck for transportation damage, sometimes the corners of the panels become slightlybent, if this happen gently straighten using your hand. Some of the connecting tabs mayalso have closed up during transportation, prise them open with a small flat bladedscrewdriver.NOTE: It is recommended to open all the tabs up slightly to ease the assembly of the cabinet, thetabs can then be tapped back down with a rubber mallet, see Fig.2.

/ 3

Related manuals for Sealey AP02DFC