Sealey AK98941 Instructions Manual

1.1 Safety Instructions WARNING! Ensure Health & Safety, local authority andgeneral workshop practice regulations are adhered towhen using this tool. DO NOT use the suction cup if any parts are damaged ormissing as this may cause failure and/or personal injury. Before each use, check condition of suction cup. Examinerubber pads for excessive glaze, cuts or roughness. If anycomponent is worn or damaged replace immediately. DO NOT clean the suction cup with solvents or otherharsh chemicals. Use genuine parts only. Unauthorised parts may bedangerous and will invalidate the warranty. Use in a suitable work area. Keep area free fromunrelated materials and ensure that there is adequatelighting. WARNING! Always wear approved eye, face and handprotection when using the suction cup. Remove ill fitting clothing. Remove ties, watches, rings,other loose jewellery and contain and/or tie back long hair. Maintain correct balance and footing. DO NOT over reach,ensure the floor is not slippery, wear non-slip footwear. Keep children and unauthorised persons away from theworking area. Ensure workpiece is secure before attaching and usingthe suction cup. WARNING! Ensure that the surface to which the suctioncup is to be attached is non-pourous, clean, dry and freefrom oil and grease. DO NOT exceed the maximum pull capacity of the suctioncup. DO NOT use the suction cup for any purpose other thanthat for which it is designed. DO NOT use the suction cup when you are tired or underthe influence of alcohol, drugs or intoxicating medication. When not in use, store in a safe, dry, childproof location. DO NOT use any sharp object to loosen the suctioncup as it may damage the rubber and prevent the toolfrom creating suction. DO NOT attempt to attach the suction cup to a person assevere bruising and/or damage to internal organs canoccur. DO NOT allow anything to interfere with the freemovement of the plunger whilst the suction cup isattached to a surface. Keep fingers clear of suction release tag during use. DO NOT allow anything else to touch the release tabwhilst in the process of lifting e.g. other lifting gear oradjacent fixtures and fittings.InStRUctIonS foR:VACUUM SUCTION CUPS - 40kgModEl no's: Ak98941 & Ak98942thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properlymaintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONSIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE kEEP INSTRUCTIONS SAFE FOR FUTURE USE.2. INTRODUCTION & SPECIFICATIONAk98942 is a profiled rubber suction cup suitable forattachment to CURVED SURFACES such as windscreens.Red line indicator warns of any vacuum loss. can also be usedon smooth, non-porous flat surfaces such as glass, sheet metaland tiles.Original Language Version AK98941, AK98942 Issue: 1 - 23/07/12© Jack Sealey limited 2012Model No: Ak98941 Ak98942Size: Ø178mm Ø178mmMaximum Lift Capacity: 40kg (horizontal) 40kg (horizontal)Ak98941 is a rubber suction device with a red line indicatorwhich warns of any vacuum loss. Easy attachment on smooth,non-porous FLAT SURFACES such as glass, sheet metal andtiles.

/ 2

Related manuals for Sealey AK98941