Sealey AK7061.V2 Instructions Manual

INSTRUCTIONS FOR:STAPLE & NAIL GUN 6-14mmMODEL No: AK7061.V2Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSEDAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY INSTRUCTIONSOriginal Language Version AK7061.V2 Issue: 1 - 04/01/11 WARNING! Ensure health & safety, localauthority, & general workshop practiceregulations are adhered to when using thisstaple/nail gun. Maintain the staple/nail gun in good condition.(use an authorised service agent). Use this product in an adequate working area forits function, keep area clean, tidy and free fromunrelated materials. Ensure there is adequatelighting. WARNING! Always wear approved eye or faceprotection when operating the staple/nail gun. Remove ill fitting clothing, ties, watches, rings, otherloose jewellery, and contain and/ or tie back long hair. Wear appropriate protective clothing. Maintain correct balance and footing. Ensure thefloor is not slippery and wear non slip shoes. Keep children and unauthorised persons awayfrom the working area. DO NOT force this product to achieve a task itwas not designed to perform. DO NOT operate if any parts are damaged ormissing. This may cause failure or possible injury. DO NOT get the Stapler/Nailer wet or use indamp or wet locations. DO NOT point at other persons or animals. DO NOT operate if you are tired, under theinfluence of alcohol, drugs or intoxicatingmedication. When not in use store in a safe, dry, child proofarea.Specification:Model No: ........................................................AK7061Crown Size: .......................................................9.5mmStandard Staple Sizes: .................. 6, 8, 10, 12, 14mmHoop Staples: .....................................................12mmNail sizes: .............................................. 10, 12, 14mmThree in one staple and nail gun fitted with anadjustable power control and staple remover.Features a removable sole plate for easyclearance of blockages and is supplied with astarter pack of nails and staples. Supplied in astorage case, this staple and nail gun is suitablefor a wide range of applications.2. INTRODUCTION3. SPECIFICATION4. OPERATING INSTRUCTIONS4.2 Prior to stapling, ensure that the stapler is correctlypositioned and the sole plate is in firm contact withthe surfaced to be stapled. Firmly depress thetrigger until the gun fires (fig.2).4.3 How to clear blockages. Remove the feed bar(fig.1) and any loose staples remaining in theguidance track. Using the tabs on the sole plate,pull the sole plate back and downwards to hinge itaway from the main body. Clear any damagedstaples away from the staple exit path. Hinge up thesole plate. Pull back on the tabs and move it backinto position within the main body. (fig.3)4.1 Hold the stapler in one hand and point away fromyour body. Push in and down on the stapler feedbar and withdraw it from the stapler. Insert newstaples (fig.1) or nails into the guidance track.See (fig.5) for staple placement within the track.Reinsert the feed bar and hook upwards to retain it.fig.1fig.2

/ 2

Related manuals for Sealey AK7061.V2