Sealey AK3845 Instructions Manual

 WARNING! Ensure Health & Safety, local authority and generalworkshop practice regulations are adhered towhen using this equipment. WARNING! DO NOT attempt to dismantle the strut under anycircumstances until the spring compressors are in place andthe spring has been sufficiently compressed. Familiarise yourself with the applications, limitations andpotential hazards of this spring compressor set. Maintain the spring compressor set in good condition. Replace orrepair damaged parts. Use genuine parts only. Unauthorisedparts may be dangerous and will invalidate the warranty. Keep the work area clean, uncluttered and ensure there isadequate lighting. WARNING! Wear approved safety eye protection (standardspectacles are not adequate). Maintain correct balance and footing. Ensure the floor is notslippery and wear non-slip shoes. Remove ill fitting clothes. Remove ties, watches, rings and otherloose jewellery. Contain or tie back long hair. Wear appropriate protective clothing. Keep children and unauthorised persons away from the workingarea. Ensure jaws are correctly engaged on spring before commencingcompression. Ensure the jaws and the body of the compressor are correctlyaligned at all times during spring compression. DANGER! Stop compressing the spring before it becomes coilbound. DO NOT leave compressed spring unattended. DO NOT operate spring compressor set if parts are damaged or missing as this may cause failure and/orpersonal injury. DO NOT use the spring compressor set for a task it was not designed to perform. DO NOT allow untrained persons to use the spring compressor set. DO NOT operate spring compressor set if you are tired, or under the influence of alcohol, drugs or intoxicatingmedication. WARNING! DO NOT use air tools with this product. WARNING! DO NOT compress the spring to an extent where the coil windings touch. WARNING! DO NOT compress the spring to an extent where the jaws touch. When not in use clean and store the spring compressor set in a safe, dry, childproof location. IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s serviceinstructions, or a proprietary manual, to establish the current procedure and data. WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot coverall possible conditions and situations that may occur. It must be understood that common sense andcaution are factors which cannot be built into this product, but must be applied by the operator.Heavy-duty coil spring compressor with hardened steel body and force screw. Ensures smooth compression ofspring.Drive: . . . . . 19mm Hex Max. Jaw Opening . . . . 280mmIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONALREQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THEPURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONALINJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.INSTRUCTIONS FOR:HEAVY DUTY COIL SPRING COMPRESSORSET 2pcMODEL No: AK3845Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions andproperly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONS2. DESCRIPTION & SPECIFICATIONOriginal Language Version AK3845 Issue No.1 18/04/12

/ 2

Related manuals for Sealey AK3845