Sealey AK36D.V2 Quick Start Manual

36ltr/ 80ltr Mobile oil Drainer ManualDischargeModel no: aK36D.V2 & aK80D.V2thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.iMportant: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safety Warning! ensure Health & Safety, local authority, and generalworkshop practice regulations are adhered to when using this equipment.9 Familiarise yourself with the application, limitations and hazards of the oildrainer.9 Maintain the drainer in good condition (use an authorised service agent).9 Replace or repair damaged parts. Use genuine parts only. Unauthorisedparts may be dangerous and will invalidate the warranty.9 Keep the work area clean, uncluttered and ensure there is adequatelighting.9 Keep the drainer clean for best and safest performance.9 Maintain correct balance and footing. ensure the floor is not slipperyand wear non-slip shoes.9 Keep children and unauthorised persons away from the work area.8 Do not use the drainer for any purpose other than that for which itis designed.8 Do not operate the drainer if any parts are damaged or missing asthis may cause failure and/or personal injury.8 Do not stand on the drainer.8 Do not allow untrained persons to operate the drainer.8 Do not operate the drainer when you are tired or under the influenceof alcohol, drugs or intoxicating medication.9 When not in use, store in a safe, dry, childproof area.9 dispose of waste oil in accordance with local authority regulations.2. introDuctionPolyethylene reservoir, 36/80ltr capacity, mounted on four castors for mobility.drain pan, with filter, on height adjustable down tube. Hand grips for emptying(AK36d.V2): rotary pump or gravity drain tap for emptying (AK80d.V2)3. specificationModel no:............................................................. aK36D.V2 .............................................................................. aK80D.V2Air discharge: ................................................................... no ...........................................................................................noCapacity: ......................................................................... 36ltr ........................................................................................ 80ltrCollection Bowl Capacity (ltr): ......................................... 15ltr ........................................................................................ 15ltrGravity discharge: ............................................................ no ..........................................................................................YesGravity Feed: ................................................................... Yes ..........................................................................................YesManual discharge: ........................................................... Yes ..........................................................................................YesMaximum Height to Pan: .......................................... 1600mm ..................................................................................1800mmMinimum Height to Pan: ............................................. 760mm ....................................................................................940mmModel no: ...................................................................AK36d .................................................................................... AK80dPump discharge: .............................................................. no ...........................................................................................noSuction Probe: .................................................................. no ...........................................................................................noTemperature Range: .................................................... <80°C ..................................................................................... <80°C4. asseMbly4.1. Insert the lower tube through lower tube clamp and secure by tightening the clamp.4.2. Place the tool tray over the lower tube.4.3. Insert the upper tube into the lower tube.4.4. Slide the upper tube retaining clip down the upper tube (press the two ends together to release the grip) until the clip rests on the lowertube at the required level.4.5. Place the drain pan on top of the upper tube.fig.1AK36d.V2 AK80d.V2 Issue 1 (3) 10/06/19Original Language Version© Jack Sealey limitedRefer toinstructionsWear eyeprotectionWear protectiveglovesWear protectiveclothing

/ 2

Related manuals for Sealey AK36D