Sealey AB933 Instructions Manual
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONALREQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THEPURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONALINJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used accordingto these instructions and properly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONS2. INTRODUCTIONI N S T R U C T I O N S F O R :PROFESSIONAL GRAVITYFEED AIR BRUSH KITMODEL: AB933AB933 Issue No: 1 - 02/04/08 AB933 Issue No: 1 - 02/04/08Metal body construction with built-in gravity feed pot and0.25mm nozzle. Features a double-action trigger providingprecision control over paint flow, which allows fora professional finish. Supplied in storage case.3. ASSEMBLY3.1. Attach a suitable air hose onto the air hose connection underneath the air brush trigger and the other endonto the air supply.NOTE: The maximum air supply to the air brush should never exceed 45psi. Normal operating pressure isapprox 30psi. WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations areadhered to when using tools. WARNING! Air brushes produce a fine mist of paint and solvents which may be harmful by inhalation.Always wear suitable protective breathing equipment which can be obtained from your local SealeyDealer. For a better understanding of the risks involved with any particular paint or solvent read thewarnings on the containers and follow the advice given. Also take measures to protect the eyes and skin from contact with paint and solvents. A full range ofpersonal safety equipment is available from your Sealey Dealer. DO NOT operate the air brush near other people unless they are wearing the same protective equipment. DO NOT eat or drink when using the air brush. DO NOT allow smoking or open flame in the work area. Ensure that the air brush and accessories are in a clean, sound condition and good working order. Takeaction for immediate repair or replacement of damaged parts. Use recommended parts only.The use of unauthorised parts may be dangerous and will invalidate the warranty. Ensure the air brush supply hose is not tangled, twisted or pinched. DO NOT use air brush or accessories if damaged. DO NOT operate air brush while under the influence of drugs, alcohol or intoxicating medication, or iffatigued. DO NOT direct spray against yourself, other persons or animals or electrical equipment. DO NOT use the air brush for a task it is not designed to perform. Always ensure adequate ventilation in the work area. Always disconnect from the air supply before dismantling the air brush for cleaning and maintenance. DO NOT leave the air brush connected to the air supply when unattended. TS DIAGRAM |
Related manuals for Sealey AB933
Sealey AB933.V2 Instructions For Use Manual
Sealey AK623 Instructions Manual
Sealey AK629 Instructions Manual
Sealey AK628 Instructions Manual
Sealey AK623 Instructions Manual
Sealey AK624 Instructions Manual
Sealey AK623 Instructions Manual
Sealey SLC2 Instructions Manual
Sealey SG14 Instructions Manual
Sealey MOTB Instructions Manual
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved