Menu
Sanyo VCB-3385P Instruction Manual
  | |
Contents |
Printed on recycled paper1AC6P1P2707--L73R2/XE, L73R5/XE, UK (0503TR-KP-TTC) SANYO Electric Co., Ltd.Printed in TaiwanINSTRUCTION MANUAL VCB-3385PVCB-3380PVCB-3380P-UKB/W CCD cameraAbout this manualBefore installing and using the camera, please read this manualcarefully. Be sure to keep it handy for later reference.Depending on the conditions of use, installation and environment,please be sure to make the appropriate settings and adjustments.If you need help with installation and/or settings, please consultyour dealer.FEATURES Backlight compensation 1/3-inch CCD solid-state image device (about470,000 pixels) Horizontal resolution of 570 TV lines, S/N ratio of50 dB min. Minimum required illumination of 0.07 lx (F1.2lens, 50 IRE) High speed electronic shutter: 1/50 – 1/100,000sec. Power supplyVCB-3385P: 24 V AC and 12 – 15 V DCVCB-3380P/3380P-UK: 220 – 240 V ACExternal dimensionsVCB-3385P VCB-3380PVCB-3380P-UK0.5121.3109.51441.791/4"-20 UNC57455745PRECAUTIONS In case of problemDo not use the camera if smoke or a strange odor comes from theunit, or if it seems not to function correctly. Disconnect the powercord immediately, and consult your dealer or a Sanyo AuthorizedService Center. Do not open or modifyDo not open the cabinet, as it may be dangerous and cause damageto the unit. For internal settings and repairs, consult your dealer or aSanyo Authorized Service Center. Do not put objects inside the unitMake sure that no metal objects or flammable substance get insidethe camera. If used with a foreign object inside, it could cause a fire,short-circuits or damages. If water or a liquid gets inside the camera,disconnect the power cord immediately, and consult your dealer ora Sanyo Authorized Service Center. Be careful to protect thecamera from rain, sea water, etc. Be careful when handling the unitTo prevent damages, do not drop the camera or subject it to strongshock or vibration. Install away from electric or magnetic fieldsIf installed close to a TV, radio transmitter, magnet, electric motor,transformer, audio speakers the magnetic field they generate willdistort the image. Protect from humidity and dustTo prevent damages to the camera, do not install it where there isgreasy smoke or steam, where the dampness may get too high, orwhere there is a lot of dust. Protect from high temperaturesDo not install close to stoves, or other heat generating devices, suchas spotlights, etc., or where it could be subject to direct sunlight, asthat could cause deformation, discoloration or other damages.Be careful when installing close to the ceiling, in a kitchen or boilerroom, as the temperature may raise to high levels. Install where thetemperature range will stay between –10°C (14°F) and 50°C(122°F). (no condensation) Cleaning• Dirt can be removed from the cabinet by wiping it with a soft cloth.To remove stains, wipe with a soft cloth moistened with a softdetergent solution and wrung dry, then wipe dry with dry soft cloth.• Do not use benzine, thinner or other chemical product on thecabinet, as that may cause deformation and paint peeling. Beforeusing a chemical cloth, make sure to read all accompanyinginstructions. Make sure that no plastic or rubber material comes incontact with the cabinet for a long period of time, as that maycause damage or paint peeling.NAMES AND FUNCTIONS OF PARTS |
Related manuals for Sanyo VCB-3380P
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved