47PJ-Net OrganizerOWNER’S MANUALControl the projector’s menuENGLISHControl the projector's menuClick on the Display Menu on the main menu. The following menu controlpage is displayed. This page is to control the on-screen display menu of theprojector. The control items and their functions are listed below.Control items OperationDisplay Menu To switch the on-screen display menu on or off by pressing the ON orOFF button. The same operation with the MENU button on the projectorand remote control handset.Cursor Used to select an item or adjust value in on-screen menu by pressing theUp, Down, Left and Right button. The same operation with the pointerson the projector and remote control handset. Used to execute the itemselected by pressing the Set button. The same operation with theSELECT button on the projector and remote control handset.To load the control setDisplay the Load Setting No. on upper part of the page. Select your desired setnumber with the pull down menu button and then press the Set button. The settingvalues of the selected set number are applied to the current settings.Example of setting
