PJ-NET ORGANIZEROWNER'S MANUAL [PLV-80/75 Series]ENGLISHE-mail setting2 Registering and deleting E-mail addressesClick "Add e-mail address" and type the e-mail addressonto the text box and click Set button. To check theregistered addresses, click Check/Delete sub menu tab.The addresses are listed as the figure on the right.✐ Up to 10 E-mail addresses can be registered.To delete the registered addresses, check the address youwant to delete and click Delete button.3 Option selection for sending alert mailClick Option sub menu tab. Check the condition itemsunder which alert mail will be sent and click Set button.Please refer to item "Examples :Type and contents of alertmail" described on the next page.Check / DeleteOption[1]––––––––––––––––––––––––––––––––––o When PJ lamp is off.o When PJ lamp replacement time is reached.o When internal PJ power circuit is failed.o When internal PJ temperature is too high.o When PJ is turned into Standby in proper user opera-tion.[2]––––––––––––––––––––––––––––––––––o When Power management function turns PJ lampoff.o When the signal is interrupted.[3]––––––––––––––––––––––––––––––––––o When lamp Corres. Value reaches[ ] hours.Attached message✐ The length of message should be less than 256characters.✐ Up to 99,999 hours can be set for use time.