Sanyo PDG-DHT100L Owner's Manual

Also see for PDG-DHT100L - DLP Projector - HD 1080p: Brochure Brochure & specs Specifications Owner's manual Specifications

Contents

41Select Digital zoom +. The On-Screen Menu disappears and“D. zoom +” appears. Press the SELECT button to expand theimage size. Use the Point ed7 8 buttons to pan the image.The Panning function can work only when the image is largerthan the screen size.You can also enter the Digital zoom + mode by pressing theD.ZOOM button on the remote control.Digital zoom +Select Digital zoom –. The On-Screen Menu disappears and“D.zoom –” appears. Press the SELECT button to compress theimage size.You can also enter the Digital zoom – mode by pressing theD.ZOOM button on the remote control.To exit the Digital Zoom +/– mode, press any button except theD.ZOOM , SELECT, and Point buttons.Digital zoom –For zooming in and out the imagesKeystoneThis function is used to store or reset the keystone correctionwhen the Main On/Off Switch is pressed to Off or the ACpower cord is unplugged. Use the Point 7 8 buttons to switchbetween each option.Store. . . Keep the keystone correction even when the MainOn/Off Switch is pressed to Off or the AC powercord is unplugged.Reset . . Release the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord isunplugged.To correct keystone distortion, press the SELECT button. TheKeystone dialog box appears. Use the Point ed7 8 buttons tocorrect keystone distortion. (p.31)CeilingRearCeilingWhen this function is set to “On,” the picture is top/bottom andleft/right reversed. This function is used to project the imagefrom a ceiling-mounted projector.RearWhen this function is set to “On,” the picture is left/rightreversed. This function is used to project the image from therear of the screen.ResetThis function returns all adjusted values to the factory defaultsettings. Press the SELECT button at Reset to display aconfirmation box. To reset, press the SELECT button at “Yes.”SCREEN MENUMove the red frame pointer to the desiredfunction and press the SELECT button.Computer InputExit the Screen Size Adjustment Menu.Quit✔Note:• The panning function may not operate properly ifthe stored Mode in the PC Adjust Menu is used.(p.38)• The minimum compression ratio can be limiteddepending on the input signal or when theKeystone function is working or when the customis selected for the screen size.• Digital zoom +/– cannot be selected when Full orTrue is selected.