Sanyo NV-E7000 Service Manual

Also see for NV-E7000 - Portable GPS And Mobile DVD Entertainment System: Supplementary guide Service manual Specifications Installation and operation manual

Contents

CONNECTING A VIDEO DECK/VIDEO CAMERA_ _41Use the AUDIO and VIDEO RCA cords included with this unit to enable the playback ofimages from your video deck or video camera.Connect your video deck/video camera to the unit.* Prior to connecting, cut off the power supply to the video deck/video camera.1Turn the power supply ON for the video deck/video camera”VIDEO” will be displayed on the screen for roughly 10 seconds.*If the unit is in another mode, press the button to return the unit to the VIDEO mode.2Start playback on the video deck/video camera.* Refer to the video deck/video camera instruction manual for their respective operationmethod.3When connecting the unit to the video deck/video camera, press the MODE button toswitch modes in the following order:Video deck/video camera operation is enabled only after having put the unit in VIDEOmode.Hint “VIDEO” “NAVI” “DVD”