Menu
Sanyo MCO-19MUVH Instruction Manual
Also see for MCO-19M: Service manual
                                                                              |
465. Pull out the N 2/O 2 gas injection nozzle and N 2/O 2 gas injection nozzle tube. (See Fig. 4.)6. Pull out the humidifying pan. (See Fig. 5.)7. Loosen the two screws securing the fan cover and take off the fan cover. (See Fig. 6.)8. Lift the duct and remove it from the pins on the rear side. (See Fig. 7.)9. Remove the chamber circulation fan by pulling out the central spring and then by pulling out the fan.(See Fig. 8.)10. Remove the screw securing the clamp for the side support and remove the clamp. (See Fig. 9.)11. Lift the tray brace off of the pins. (See Fig. 10.)Fig. 4 Fig. 5 Fig. 6Fig. 7 Fig. 8Fig. 9 Fig. 10Humidifying panFan coverDuctFanClamp SidesupportGas injection nozzleGas injection nozzle tubeGet other manuals https://www.bkmanuals.com |
Related manuals for Sanyo MCO-19M
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved