Sanyo MCD-S665F Instruction Manual

Also see for MCD-S665F: Service manual Service manual

mPOWER SUPPLY~.–—. -.. —””_.. “.—“--..{ 1+-m________ L_--------lI Battery power operation ,l_________________ _Install batteries.Observe + and - signs.U*&criesReDlaCe lidCAUTION:WHEN INSTALLING THE BATTERIESTo prevent leakage from the batteries, which iscorrosive and can cause personal injury anddamage to the unit, observe the followingprecautions:i,2.3.4.5.6.The batteries must be installed correctly.Match the polarities (+ and - signs) on thebatteries, to the polarities shown on theback of the unit.Do not mix new batteries with old or usedbatteries.Only use batteries of the same type andbrand.If the unit will not be used for an extendedperiod of time, remove the batteries andstore them in a cool place.Carefully follow the battery manufacturer’sinstructions for proper use and disposal.DO NOT ALLOW YOUNG CHILDREN TOHANDLE BATTERIES.IMPORTANT NOTE:When the batteries have becomedischarged, they must be disposed of in asafe manner which complies with allapplicable laws.-------––l–_–––.j AC power operation I----- -- ——-— -——— JTake out the cord and connect it.AC INPUT0.%’ AC 230- 240V,L>50Hz#\,3NOTES:- When the AC mains lead is connected tothe unit, the installed batteries will beautomatically disconnected.- The FUNCTION switch is mounted on thesecondary side. The unit is not discon-nected from AC power, even switched off.3-