Sanyo LVF-PF72S User Manual
10.2cmThank you for purchasing our 7” Digital PhotoFrame. You can play your favorite photos (JPEGfile) directly from a memory card or a USB flashdrive without a computer. Read the followinginstructions for more details.(A)(B)Landscape Viewing Portrait ViewingDigital Photo FrameLVF-PF72SUser GuideManufacturer and AddressSANYO Electric Co., Ltd.5-5, Keihan-hondori, 2-chome, Moriguchi CityOsaka, JapanAuthorized Representative and AddressSANYO FISHER Sales(Europe) GmbHStahlgruberring 4,D-81829 Munich, GermanySDMMC MS(A)(B)(A)(B)1600x900 2008/07/25 Delete AllDeleteEdit Mode Page: 1/1001_1 1002_2 2003_3 3003_4 4003_5 5003_6 6ROOT1024 X 768 2006/3/7 ExitSaveFile Number: 1/100SUPPORTPICTURESSave FilePlease Wait100%001_1 1002_2 2003_3 3003_4 4003_5 5003_6 6ROOT1024 X 768 2006/3/7 ExitSaveFile Number: 1/100SUPPORTPICTURES: Select 1024 X 768 2008/7/25Thumbnail Mode Page : 1/1Portrait positionFigure 1Figure 2Figure 3Figure 4Figure 5Figure 6Figure 7Figure 8Figure 9Figure 10: Select 1024 X 768 2008/7/25Thumbnail Mode Page : 1/1(A)(B)Attach/Detach positionLandscape positionSD™ is a trademark.For EU users onlyTrademark Information1. Remove the stand from the unit.2. Place the mounting holes of the unit on the wallscrews (not supplied) as shown in Figure.Note: Take care when installing it. It may causedamage or serious injury should it fall fromits mountings.1. Inser t the round end of the stand into thereceptacle.2. Rotate the stand to the direction as shown inFigure until it is fixed tightly in position.Note: The unit can be placed horizontally orvertically for a landscape or portrait display.• Keep away from water, moisture and dust.• Ambient Temperature should be 0~40°C. Do notstore the unit in hot or cold areas.• Do not drop the unit or give a strong impact.• Do not try to disassemble the unit by yourself.• Connect the AC adapter to the DC5V jack and tothe wall outlet.• Use attachments/accessories specified by themanufacturer only.• When left unused for a long period of time, the unitshould be unplugged from the wall outlet.Warning: To reduce the risk of fire or electric shock,do not expose the unit to rain, moisture and water.Caution: Changes or modifications not expresslyapproved by the party responsible for compliancecould void the user's authority to operate theequipment.Mounting the Photo Frame on Wall(Figure 3)1. Connect one end of the supplied AC adapter(DC5V/1.5A) to the unit, and the other end tothe wall outlet.2. Switch the power on ( to the position “I”) to turnon the unit.Safety InformationThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.This class B digital apparatus complies withCanadian ICES-003.This set complies with the EMC Directive 2004/108and with the LVD Directive 2006/95.FCC NOTICECanadian ICES-003 InformationCEProduct Overview (Figure 1)Attaching the Stand (Figure 2)Connecting to the Power (Figure 4)1 LEFT/ (Previous)button2 RIGHT/ (Next)button3 DOWN/ (Brightness)button*Each press of thebutton will adjust thebrightness level.4 UP/ (Rotate) button5 MODE/ (Stop) button6 SEL.(Select) / (Play/Pause) button7 SD/MMC/MS/xDslot8 USB port*Supports a USBash drive only.9 DC5V jack10 Stand receptacle*For attaching thesupplied stand.11 Power switch ON/OFF12 Wall-mountingholes• This unit can play only JPEG format.1. Insert your memory card into the memory cardslot according to the orientation marked on theback of the unit.2. Insert a USB flash drive to the USB port.Note: This unit can display photos in either amemory card or a USB flash drive at atime. If a USB flash drive and a SD/MMC/MS/xD card are inserted in the unit at thesame time, files in the USB flash drive willbe displayed. If you want to display files ina SD/MMC/MS/xD card, remove the USBflash drive from the unit.Note: Displaying photos bigger than 480 x 234pixels will take longer time for loading.1. Press LEFT or RIGHT button to select“Photo” in the main menu, then press SEL./button to confirm.2. The slideshow starts.3. To pause the slideshow, press SEL./ button.Press SEL./ button again to restar t theslideshow.A.Removing the Changeable FrameRelease all the hooks in the edge of thechangeable frame by pulling up the changeableframe using your fingers.B.Installing the Changeable Frame1. Hold the changeable frame and place it on theunit.2. Press the changeable frame for all the hooks tobe fixed in place.N o w t h e c h a n g e a b l e f r a m e i s i n s t a l l e dsuccessfully.Removing and Installing theChangeable Frame (Figure 5)Viewing Photos and Slide Shows(Figure 7)Inserting a Memory Card or aUSB Flash Drive (Figure 6)Caution: Do not insert “Memory Stick Duo” or“Memory Stick Pro Duo” into the unit. In caseof using them, be sure to attach “Memory StickAdapter” in order not to have a trouble toremove it from the unit.Auto Rotation• In the initial setting of the unit, Auto Rotationis set to ON in Setup menu. Landscape orportrait display of a photo will be automati callyswitched according to the unit orientation.If the horizontally placed unit is rotated leftby 90 degrees, the photo will automaticallyrotate by 90 degrees clockwise. If the verticallyplaced unit is rotated right by 90 degrees, thephoto will automatically rotate by 90 degreescounterclockwise.Note 1: When the unit is placed horizontally, AutoRotation only works by rotating the unitto left by 90 degrees. Rotating the unit toright will not have any response. Whenthe unit is placed vertically, Auto Rotationonly works by rotating the unit to right by90 degrees. Rotating the unit to left willnot have any response.Note 2: The photo will be scaled down to anappropriate size to fit in the height orwidth of the unit if the photo orientation isdifferent from its original one.Manual Rotation• Press LEFT or RIGHT button to select thephoto you wish to rotate in the slideshow, thenpress UP/ button to rotate by 90 degreesclockwise.Note 1: Each press of UP/ button will rotate thephoto by 90 degrees clockwise.Note 2: Manual Rotation can be also set in theThumbnail mode.Note 3: All the rotation effects will be cancelledwhen returning to the main menu.B. RotationA. Viewing the Clock & Calendar1. Press LEFT or RIGHT button to select“Clock & Calendar” in the main menu and pressSEL./ button.2. Pressing SEL./ button will switch betweenClock, Calendar and photos of a memory card.3. Press MODE/ button again to return to themain menu.B. Setting Clock & Calendar1. Press LEFT or RIGHT button to select“Setup” in the main menu, then press SEL./button.2. Press UP or DOWN button to select “Clock &Calendar” and then press SEL./ button.Setting the Time3. Press UP or DOWN button to select “Set TheTime”, and press SEL./ button, then “SetTime” window will appear on the screen.4. Press LEFT or RIGHT button to select Hour,Minute, Second or AM/PM and set the time bypressing UP or DOWN button.5. Press LEFT or RIGHT button to select “OK”and press SEL./ button to set it.Setting the Date3. Press UP or DOWN button to select “Set TheDate”, and press SEL./ button, then “SetDate” window will appear on the screen.4. Press LEFT or RIGHT button to select Year,Month or Day and set the calendar by pressingUP or DOWN button.5. Press LEFT or RIGHT button to select “OK”and press SEL./ button to set it.6. To leave the Setup menu, press MODE/button again.1. Press LEFT or RIGHT button to select “Edit”in the main menu, and press SEL./ button.Then “Edit Dialog” window will appear.2. Press LEFT or RIGHT button to select “Copy”,then press SEL./ button to enter theSub-menu.3. Press UP or DOWN button to select a file, thenpress SEL./ button to select photos you wishto copy.Note 1: Press SEL./ button on the selectedfolder to enter the Sub-menu.Note 2: To deselect the file, press SEL./ buttonagain on the selected file.Note 3: Repeat the above step 3 to select somefiles and the selected files will behighlighted.Note 4: The internal memory can store about 45photos in case each photo is less than 32megapixels.4. Press RIGHT button and then LEFT button toselect “Save”, then press SEL./ button.5. The file is now saved in the internal memory.6. To exit Edit mode, press LEFT or RIGHT buttonto select "Exit", then press SEL./ button.Clock & Calendar Setting (Figure 8)Editing Files in the Internal Memory(Figure 9)A. Copying Photos from a Memory Cardor a USB Flash DriveCaution:Once power is switched off, the set time andcalendar will be reset, because there is nobattery back up in this unit.A. Thumbnail Mode1. Press MODE/ button during the slideshow toenter Thumbnail mode.2. Press LEFT or RIGHT button to select thephoto you wish to play, then press SEL./button.Note: If the thumbnail has more than one page,move the cursor to the last photo andpress RIGHT/ button to go to the nextpage. Move the cursor to the first photoand press LEFT/ button to return to theprevious page.3. The slideshow starts with the photo selected.Note 1: Refer to Setup Menu in this user guide forthe slideshow settings.Note 2: Press MODE/ button again to return tothe main menu.OSD menus Sub menusInterval Time 5 Sec., 15 Sec. , 30 Sec., 1 Min.,5 Min., 30 Min., 1 Hour, 4 Hours,12 Hours, 1 DayTransition No Effect, Random ,Cover Up, Cover Down,Uncover Left, Push Right,Wipe Up, Wipe Down12/24 HourFomat12H , 24HClock & Calendar Set The TimeSet The DateContrast -4, -3, -2, -1, 0 , +1, +2, +3, +4OSD Language English , French,German, Italian,Spanish, Portuguese,Dutch, PolishPanel Full Screen, Original*Auto Rotation On , OffReset Confirm**Exit Setup Mode* Select “Original” to display photos in theiroriginal aspect ratios. Black bands appear onleft and right sides of the screen in landscapeview, or top and bottom of the screen in portraitview. Select “Full Screen” to display photos infull screen size.** Selecting Reset will restore the initial settings.(The initial settings are marked by squares inthe above table.)1. Press MODE/ button to enter the main menu.2. Press LEFT or RIGHT button to select“SETUP” in the main menu, then press SEL./button.3. Press UP or DOWN button to select an item inthe Setup menu, and press SEL./ or RIGHTbutton to go to the Sub menus as shown in thebelow table.4. Press UP or DOWN button to select a setting,then press SEL./ to set it.5. To leave Setup menu, press MODE / buttonagain.1. Press LEFT or RIGHT button to select“Favorites” in the main menu, then press SEL./button.2. The slideshow will star t from the internalmemory.3. Press MODE / button to enter the ThumbnailMode.4. Press LEFT or RIGHT button to select thephoto you wish to play, then press SEL./button.5. The slideshow starts with the photo selected.Display 7" colour TFT LCD panelView Area 480 X 234 pixels, 16:9 aspectratioBrightness 150 cd/m²Contrast 150:1Stand DetachableMemory Card Slot SD/SDHC/MMC/MS/MS Pro/xDI/O Ports DC-in / USB 2.0 portInternal Memory A b o u t 4 5 p h o t o s c a nbe stored (in case eachp h o t o i s l e s s t h a n 3 2megapixels).Supported FileFormatJPEG (up to approx. 144megapixels)AC Adapter Input: 100-240V ~50/60Hz0.4AOutput: 5V / 1.5ADimensions Approx.206 x 139 x 33 mm(W x H x D)(Without Detachable Standand Changeable Frame)Weight Approx.337g(Without Detachable Standand Changeable Frame)Accessories AC adapterDetachable standWhite changeable frame(Attached to the unit)User Guide6 bonus static stickersViewing Files in the InternalMemory (Figure 10)Setup MenuSpecifications1. Press LEFT or RIGHT button to select “Edit”in the main menu, and press SEL./ button.Then Edit Dialog window will appear.2. Press RIGHT button to select “Delete”, thenpress SEL./ button to enter the Edit mode.3. Press LEFT or RIGHT button to select a photo,and press DOWN button to select “Delete”, thenpress SEL./ button to delete it. Press UPbutton to deselect “Delete”.Note 1: To delete all, press DOWN button andpress RIGHT button to select “Delete All”,then press SEL./ button. Press UPbutton to deselect “Delete All”.Note 2: Press MODE / button to return to themain menu.B. Deleting Photos in the InternalMemoryYour SANYO product is designed and manufacturedwith high quality materials and components whichcan be recycled and reused. This symbol meansthat electrical and electronic equipment, at theirend-of-life, should be disposed of separately fromyour household waste. Please dispose of thisequipment at your local community waste collection/recycling centre. In the European Union there areseparate collection systems for used electrical andelectronic products. Please help us to conserve theenvironment we live in!No power• Check if the AC adapter is plugged into the walloutlet.• Make sure there is power to the wall outlet.Unable to view photos• T h i s u n i t i s d e s i g n e d t o s h o w p h oto s i nstandard JPEG format following the cameraindustry standard. Some images in non-standardJPEG format such as web images, scannedimages or photos in R AW format taken byprofessional cameras cannot be displayed inthe unit correctly. Please use PC applications toconvert such images into standard JPEG format.• Check if using compatible memory cards.If photo display is slow• Use lower resolution photo.TroubleshootingNotes896410121112735Cancel12:00:00 AMSet TimeOK Cancel2008/01/01Set DateOK12:00:00Jan - 1- 2008 TuesdayAM2008.1.1Sun6132027Mon7142128Tue18152229Wed29162330Fri4111825Sat5121926Thu310172431LVF-PF72S EN QG ( rev0317).indd 1LVF-PF72S EN QG ( rev0317).indd 1 2009/3/18 下午 02:04:362009/3/18 下午 02:04:36 |
Related manuals for Sanyo LVF-PF72S
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved