Sanyo LCD-26XR9DA Instruction Manual

Also see for LCD-26XR9DA: Instruction manual Service manual

Sanyo LCD-26XR9DA Instruction Manual Manual pdf 14 page image

Connecting Component VideoConnections (Continued)To connect a device using component video:1. Turn on your TV, then press SOURCE button. The Input Source menu opens.2. Press 5or6to select Component1/Component2 correspondingly, then press OK to confirm.3. Turn on your external device and set it to the correct mode. See the device’s user guide for more information.To play component video from an external device:Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks onthe device .Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device.Audio cableConnecting a ComputerHow to connect:1. Turn on your TV, then press SOURCE button. The Input Source menu opens.2. Press5or6to select D-SUB, then press OK to confirm.3. Turn on your computer, and adjust the display properties as required.To play video from a computerConnect a D-Sub cable between the D-SUB jack on the computer and the D-SUB input jack on the unit.Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit.D-Sub cable(analog RGB) To monitor port(15-pin D-Sub)To audio output jackAudio cable(stereo mini plugs)TV REAR11Cables are often color-codedto connectors. Connect red tored, white to white, etc.Component video cableDevice withcomponent videoTV REAR