Sanyo LC75411ES Manual
Ordering number : ENN692862901RM (OT) No. 6928-1/34OverviewThe LC75411ES and 75411WS are electronic volumecontrollers that enable control of volume, balance, fader,bass/treble, loudness, input switching, and input gainusing only a small number of external components.Functions• Volume: 0 dB to –79.5 dB in 0.5-dB steps, and –∞ (161positions) Balance function with separate L/Rcontrol• Fader: rear output or front output can be attenuatedacross 16 positions (in 1-dB steps from 0 dB to–2 dB, 2-dB steps from –2 dB to 20 dB, 10-dBsteps from –20 dB to –30 dB, and –45 dB,–60 dB, –∞)• Bass/treble: Both bass and treble can be controlled in1-dB steps from 0 dB to ±6 dB, and in 2-dBsteps from ±8 dB to ±12 dB.• Input gain: 0 dB to +18.75 dB (1.25-dB steps)amplification is possible for the input signal.• Input switching: four input signals can be selected forLeft and for Right• Loudness: A tap is output from the –32 dB position of a2 dB step volume control resistor ladder.A loudness function can be implemented byconnecting an external RC circuit.Features• On-chip buffer amplifier cuts down number of externalcomponents• Low switching noise generated by on-chip switchthrough use of silicon gate CMOS process, for lowswitching noise when there is no signal• Low switching noise when there is a signal due to useof on-chip zero-cross switching circuit• On-chip 1/2 VDD reference voltage circuit• Controls performed with serial input (CCB)LC75411ES, 75411WSSANYO Electric Co.,Ltd. Semiconductor CompanyTOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPANElectronic Volume Controllerfor Car Audio SystemsCMOS ICAny and all SANYO products described or contained herein do not have specifications that can handleapplications that require extremely high levels of reliability, such as life-support systems, aircraft’scontrol systems, or other applications whose failure can be reasonably expected to result in seriousphysical and/or material damage. Consult with your SANYO representative nearest you before usingany SANYO products described or contained herein in such applications.SANYO assumes no responsibility for equipment failures that result from using products at values thatexceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or otherparameters) listed in products specifications of any and all SANYO products described or containedherein.• CCB is a trademark of SANYO ELECTRIC CO., LTD.• CCB is SANYO’s original bus format and all the busaddresses are controlled by SANYO. |
Related manuals for Sanyo LC75411ES
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved