Sanyo FW55D25F Owner's Manual

Also see for FW32D06F: Quick start guide

Sanyo FW55D25F Owner's Manual Manual pdf 12 page image

No supplied cables are used with these connections:● Please purchase the Necessary Cables at your local store.Before you connect the AC Power Cord:Be sure other Devices are connected properly before plugging in the ACPower Cord.Selecting your Connection qualityHDMI - Highest qualitySupports High-Definition Digital signals and gives highest picture andsound quality. Video and Audio signals are combined in one cable. Youmust use HDMI for full High-Definition Video and to enable HDMI-CEC.Note(s)● SANYO HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a formof Digital Rights Management that protects High-Definition content in Blu-ray Discs orDVDs.Component (Y Pb Pr) - High qualitySupports High-Definition Analog signals but gives lower picture qualitythan HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blueVideo cables with red / white Audio (L/R) Cables. Match the cable colorswhen you connect to the TV.Composite - Basic qualityFor Analog Connections. Composite Video / Audio Analog cable usuallycombine a yellow Video Cable with red / white Audio (L/R) Cables. Withthis Unit, yellow cable must be connected to Y (green) jack on theComponent Video Input jacks.Connecting your DevicesHDMI Digital ConnectionHDMI Connection offers the Highest Picture quality.HDMI (High-Definition Multimedia Interface) transports High-DefinitionDigital Video and multi-channel Digital Audio through a single cable.HD game consoleorBlu-ray Disc / DVD PlayerorSet-top BoxHDMI cableHDMI cableHDMI cableOUTINININHDMI-DVI ConnectionThis Unit can be connected to your Device that has a DVI Terminal.Use an HDMI-DVI Conversion Cable for this Connection and it requiresAudio Cable for Analog Audio signal as well.INININAudio (L/R) cablesAudio (L/R) cablesHDMI-DVIHDMI-DVIconversion cableconversion cableHDMI-DVIconversion cableAudio (L/R) cablesINININOUT OUTCable Receiver orSatellite Set-top Boxwith the DVI Output jackNote(s)● Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cableis recommended for the Better compatibility.For HDMI Connection● The Unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz / 44.1kHz and 48kHz of Audio signals.● This Unit accepts a 5.1 channel Audio signal (Dolby Digital) and 2 channel Audio signal(LPCM).● If Audio Source is 7.1 channel Audio signal (Dolby Digital) and user selects Multichannel atDigital output format, then the Digital Audio Output will be 5.1 channel Audio signal (DolbyDigital).● This Unit accepts only signals in compliance with EIA861.For HDMI-DVI Connection● The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.● HDMI-DVI Connection requires separate Audio Connections as well and the Audio signalsare Output as Analog (L/R) Audio.● DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.12 .EnglishContinued on next page.