Sanyo DVR-HT120 Instruction Manual

Also see for ASX-HT120W: Instruction manual

Contents

6Inserting batteriesInstall two “R6 (HP 7)” batteries.NOTE:- Remove the batteries if the remote control is not to be used for a monthor more. Batteries left in the unit may leak and cause damage.Remote control rangeDISCMENUSYSTEMMENUCH/INPUTMUTEVOLTVSURROUNDLEVELFUNCTIONTRIM TEST SOUNDRETURN SELECTTIMER CLEAROperation Status DisplayFront panel displayRemote sensorWithin approx.6 meters30°30°REC DDVD RWANGLE PBCVPS PDC REM NICAM HQSPLPEPEP1871012 13 11 14 15 162 9 3 4 5 6 20 171819These symbols can light up on your DVD recorder display:1 w Playback in progress.2 s Playback/record interrupted (Pause).3 VPS/PDC Video Programming System / Programme Delivery Control: A VPS or PDC code will be transmitted for the selectedTV program.4 REM Displays the Title/Track time remaining5 A recording (timer) has been programmed.6 NICAM The DVD recorder has detected a Nicam audio signal.7 REC Recording in progress.8 D Lights when playing a disc recorded with Dolby Digital Audio.9 dts Lights when playing a disc recorded with DTS.10 P Lights when progressive video is being output.11 DVD+RW Displays the type of DVD disc in the recorder: DVD /DVD+R / DVD+RW.12 ANGLE Displays the angle information of the DVD video disc.13 PBC Play Back Control.14 T Displays the current title number (DVD).15 TR Displays the track selected/played (CD).16 C Displays the chapter selected/played (DVD).17 ST During playback a HiFi/2 channel tone was detected or a HiFi/2 channel tone was received.18 CH Channel/programme number.19 HQ, SP, LP, EP, EP+ Displays the recording quality selected during recording. Recording qualities HQ, SP, LP, EP or EP+ are shownon the recorder display.20 Multi-function display.