Sanyo DVR-500 Instruction Manual

Contents

-E49-AUDIOSUBTITLEImportant Note:If “ ” appears on the TV screen during operation, theoperation is prohibited by the unit or the disc.Need help? Call1-800-813-3435Selecting Subtitle LanguageThis operation works only with discs on which multiple subtitlelanguages are recorded.Press [SUBTITLE] repeatedly during playback until the desiredsubtitle language appears on the TV screen.Example:SUBTITLE 01/03 : ENGLISHAfter a few seconds, it disappears.Notes:• In some cases, the subtitle language is not changed to theselected one.• When a disc supporting closed caption is played, the subtitleand the closed caption may overlap each other on the TVscreen. In this case, turn the subtitle off.• When the desired language is not selected even if the buttonis pressed, the language is not available on the disc.• When the power is turned on or the disc is replaced, selectthe subtitle language again.• If the subtitle language is not necessary, press [SUBTITLE]to select “SUBTITLE OFF”.• Please refer to “Setting Subtitle" on page E26.Selecting Audio Soundtrack Language(Multi-Language)This operation works only with discs on which multiple audiosoundtrack languages are recorded.Press [AUDIO] repeatedly during playback until the desiredlanguage appears on the TV screen.Examples:AUDIO 1/4:DOLBY D 2CHENGLISHAUDIO 2/4:DTS 5.1ENGLISH(If using an amplifier with DTS Decoder, the DTS sound willbe heard. See page E13 for the amplifier connection.)Notes:• When the desired language is not selected even if the buttonis pressed, the language is not available on the disc.• When the power is turned on or the disc is replaced, selectthe language again.• If the language is not recorded on the disc, only the availablelanguage on the disc will be heard.Notes on Audio CD playbackChanging the audio channel outputDuring Audio CD playback, press [AUDIO] to select an audiochannel (“LEFT”, “RIGHT”, or “STEREO”).