Sanyo DVD-SL33 Instruction Manual

Also see for DVD-SL33: Instruction manual Service manual Service manual

Contents

5Connecting to a digital multi-channel AV amplifierThe digital multi-channel sound of a DVD can best be decoded andplayed with a multi-channel AV amplifier (Dolby Digital decoder orMPEG-2 decoder).The AV amplifier has to be able to process the DTS audio signal inorder to play a DVD with DTS. If it cannot, then you will not be able tohear the DVD.Note:Select “Setting digital out” setting as follows. (See Page 14.)- To enjoy Dolby Digital sound, select “Dolby Digital: BitStream”.- To enjoy DTS sound select “DTS: On”.- To enjoy MPEG-2 sound, select “MPEG: BitStream”.- To enjoy 2 channel digital stereo sound, select “Dolby Digital:LPCM”, “DTS: Off”, “MPEG: LPCM”.Notes on the digital socket connectionBefore connecting, remove the protective cap from the DIGITAL OUTsocket. Replace the cap if there is not device connected to this socket.Manufactured under license from Dolby Laboratories.“Dolby”, “Pro Logic” and the double-D symbol are trademarks of DolbyLaboratories.“DTS” and “DTS Digital Out” are trademarks of Digital Theater Sys-tems Inc.PLAYABLE DISCSRegion NumberRegion number (Regional restriction code) is built-in to the unit andDVD video discs.There is a region number on the rear of the unit.The same region number or region number “ALL” of DVD discs can beused on the unit.DVD discThere are the marks on some DVD disc packages.Example:Disc type and logo markDVD-VideoAudio CDThe following types of discs can be played on the unit.Note:- Only the above types of discs can be played on this unit.DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played.- The unit can play back the Video CD (VCD).- This unit can play back the DVD-R that has recorded movie data.However, some DVD-Rs cannot be played back depending on therecording conditions.- The DVD-R that has no movie data cannot be played back.- This unit is to be used exclusively with the PAL (or NTSC) coloursystem discs. SECAM system discs cannot be used with this unit.For DVD discs: The video output signal format can be selected(“PAL 60” or “NTSC”) when playing back the NTSC discs.- For MP3 CD, please see page 11.- For Picture/JPEG CD, please see pages 12.Notes on handling discs- Do not expose the disc to direct sunlight, high humidity or hightemperatures for extended periods of time.- Discs should be returned to their cases after use.Do not apply paper or write anything on the disc surface.- Handle the disc by its edge. Do not touch the playing surface (glossyside).- Fingerprints and dust should be carefully wiped off the playing sur-face of the disc with a soft cloth.Wipe in a straight motion from the centre to the outside of the disc.- Never use chemicals such as record cleaning sprays; antistaticsprays or fluids, benzene or thinner to clean discs.Video CD/Audio CD discVideo CD/Audio CD discs are divided into tracks.DVD discs are divided into titles, and the titles are sub-divided intochapters.Multiple languagesChapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5Title 1 Title 2vv vvTrack 1 Track 2 Track 3 Track 4 Track 5Multi-languages subtitleMulti-angleMulti-aspectRegion numberClosed captionDigital multi-channel AV amplifierTo digital audio inputOptical lead(not supplied)