Sanyo DSR-2108 Instruction Manual

Contents

NETWORK settings46• MAIL TOTo set the destination mail address.Example:• MAIL SERVERSets the mail server name, as well as the USER andPASSWORD.Example:USER: To set the connection user ID for the mailserver.PASSWORD: To set the connection password forthe mail server.Example:• MAIL FROMTo set the mail address sent to the destination host.Example:4 Press the EXIT/STOP button twice.The screen returns to the NETWORK screen and thenpress the EXIT/STOP button again.Allows synchronizing the time using an internet or LAN NTPserver.1 Select "NTP SET" using the control button ({|),select "ON" using the control button (}~) andpress the ENTER button.The NTP SET screen is displayed.• ON: Use NTP server to adjust time• OFF: NTP server not used for adjusting time2 Select the following item using the control button({|) and press the ENTER button.Set the NTP server address using the control buttons({|}~) and press the ENTER button.• NTP SERVER ADDRESS1• NTP SERVER ADDRESS23 Select "TIMEZONE" using the control button ({|)and the time zone using the control button (}~).Selections: GMT –1:00 to –12:00, 0:00 to 13:004 Select "TIME TO SYNCHRONIZE" using the controlbutton ({|) and the time to synchronize using thecontrol button (}~).Selections: 00, 01, 02 - 23Press the EXIT/STOP button to return to theNETWORK settings screen.FMAIL TO@ s a n y o . c o m- - - - - - - - - - - - - -- - - - - - - - - - - - - -- - - - - - - - - - - -MAIL SERVERm a i l s e r v e r 1 2- - - - - - - - - - - - - -- - - - - - - - - - - - - -USER2 3 4 5 6- - - - - - - - - - - - - -- - - - - -PASSWORD2 0 0 6 0 9 1 5- - - - - - - - - - - - - -- - - - - -MAIL FROM1 1 1 @ A B C . c o m- - - - - - - - - - - - - -- - - - - - - - - - - - - -- - - - - - - - - - - -G Setting the NTP SETNTP SETNTP SERVER ADDRESS1 0.0.0.0.NTP SERVER ADDRESS2 0.0.0.0.TIME ZONE GMT +9:00TIME TO SYNCHRONIZE 01:00