Menu
Sanji ZX70CL User Instructions
 |
Briefed with the idea of “The Super intelligent Design Concept” Sanji engineers developed the ZX Range ofvehicle security alarm systems. The ZX rangeprofessional represents the 'state of the art' in vehiclesecurity. Read these instructions for correct system operation. All points marked are optional features.*5) ALARM ARMEDCONFIRMATIONPress the lock button, the indicatorswill flash once to confirm that thealarm is fully set.6) SENSOR SHUTDOWNPress both buttons together whensetting the alarm. The siren will sound4 chirps and the indicators will flashtwice. The sensor has now beendisabled. After 20 seconds the systemwill be fully armed, however the sensorwill be disabled.1) SETTING THEALARMPress the lock button, the unit willsound 2 soft chirps and the indicatorswill flash twice. If fitted with centrallocking the doors will lock and thesensor will switch on.7) RESETTINGTHE ALARMPress the unlock button. The unitwill sound 1 soft chirp and theindicators will flash once. If fittedwith central locking the doors willunlock.2) DOOR / BOOT /BONNET OPENWARNINGThe unit will sound two additional loudchirps and flash the indicators twicewhen setting the alarm. If a door is stillopen when the unit fully arms, thedoors will be bypassed. The system willassume a faulty door switch.3) ALARM DELAYPERIODThe sensor led will flash rapidly duringthe 20 second delay period. After thedelay, the sensor led will go on solid.The alarm is now fully armed.sensor ledflashingrapidly4) ALARM FASTARMAfter the alarm has been set press thelock button again. The unit will now goto fully armed and the sensor led willturn on solid.sensor ledflashingrapidlysensor ledon solidZX70CL USER INSTRUCTIONS9) AUTO ZONEBYPASSIf the unit detects a permanently faultyzone, e.g. door or sensor during alarmset, the system will sound 3 times thenisolate the faulty zone.8) SELECTIVEUNLOCK ONALARMRESETPress the unlock button. The unit willreset and selectively only open thedriver’s door. To open the passengerdoors press the unlock button again.*10) VIOLATIONCHIRPSWhen the alarm is reset, the unit willsound 4 loud chirps if the alarm hadtriggered during the alarm set mode.11) DOOR LOCKON STARTWhen the ignition is turned on, if all thedoors, boot and bonnet are closed, thedoors will lock.*12) DOOR LOCK/ UNLOCKIN DRIVEPress the unlock button to unlock thedoors. Press the lock button to lock thedoors.UNLOCK LOCK13) DOORUNLOCKON IGNITIONOFFSwitch the ignition off. All the doorswill unlock. If fitted with selectiveunlock, only the driver’s door will open.Press the unlock button to open thepassenger doors.*14) REMOTE LOWBATTERYWARNINGThe remote led will normally be on solidwhen pressing any button. If the remotebatteries are low the led on yourremote control will flash. Replace thebatteries with: 2 x CR1220 lithiumbatteries.ZX70CL_USER_REV2 |
Related manuals for Sanji ZX70CL
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved