◀ ▶English■ Automatic Network SetupMost wireless networks have an optional security system that requires devices thataccess the network to transmit an encrypted security code called an Access orSecurity Key. The Security Key is based on a Pass Phrase, typically a word or aseries of letters and numbers of a specified length you were asked to enter whenyou set up security for your wireless network. If you use this method of setting upthe network connection, and have a Security Key for your wireless network, youwill have to enter the Pass Phrase during during the the automatic or manual setupprocess.How to set up automatically1. Go to the Network Settings screen.(MENUm → Network → Network Settings→ ENTERE).2. Select Wireless (General), pressENTERE, and then press ENTEREagain. ● The displayed image may differ depending on themodel.U Move E Enter R ReturnNetwork SettingsSelect a network connection type.WiredWireless(General)WPS(PBC)One FootConnectionSet up wireless network by selecting yourAccess Point. You may need to enter security keydepending on the setting of the Access Point.