Menu
Samsung scd-2080p User Manual
Also see for scd-2080p: SpecificationsUser guide
                   |
COLOR DOME CAMERA User Guide28 COLOR DOME CAMERA User Guide29Operating Your Camera• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen evenif you enter one.• Only English is available in this mode.• If you move the cursor to CLR and press the Function Setup switch, all the letters aredeleted. To edit a letter, change the cursor to the bottom left arrow and press theFunction Setup switch. Move the cursor over the letter to be edited, move the cursor tothe letter to be inserted and then press the Function Setup switch.NotesSYNC : In areas where the supply is at 60Hz(NTSC),50Hz(PAL), you can synchronize the outputphase of multiple cameras using the powersynchronization function (Line-Lock) withoutusing a synchronization signal generator.- INT : Internal Synchronization Type- L/L : Power Synchronization Type, Line-lock• Press the Function Setup switch.• You can select a desired phase from 0 to 359 when select 'phase'.• When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/Ltype synchronization.• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.NotesMOTION DET :This product has a feature that allows you to observemovement of objects in 8 different areas on thescreen, and the words 'MOTION DETECTED' appearon the screen when movement is detected. You canmonitor activity more efficient.… …1) When the SPECIAL menu screen is displayed, press the Function Setup switch sothat the arrow indicates‘MOTION DET’.… 2) …Set up the mode using the Function Setup switch.- SENSITIVITY :You can select up to 8 MD areas. When SENSITIVITY number is high,motion detection sensitivity is increased to recognize even smallmovement.- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.- SEL POS : Determines which of the 4 vertices of each MD area is to be used.- XPOS: Determines the coordinate of the horizontal axis for SEL POS.- YPOS : Determines the coordinate of the vertical axis for SEL POS.- FILL→SET : Fills in a selected MD area. The color of filling is sequentially selected asbrown, orange, blue, cyan, green, yellow, magenta and red.- RETURN : Select this to save the MOTION DET menu settings and return to theSPECIAL menu.FRONT DOOR5) Enter a title, move the cursor to ‘POS’ and pressthe Function Setup switch. The entered titleappears on the screen. Select the position todisplay the title on the screen by using theFunction Setup switch and press the FunctionSetup switch. When the position is determined,select ‘END’ and press the Function Setupswitch to return to the SPECIAL menu.PRIVACY : Mask an area you want to hide on the screen.PRIVACY AREA SETUP1. AREA AREA12. MODE OFF3. MASK COLOR GREEN4. MASK TONE 15. TOP 396. BOTTOM 797. LEFT 138. RIGHT 529. RETURN |
Related manuals for Samsung scd-2080p
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved