Samsung ht-x250 Instruction Manual

Also see for HT-X250: Firmware update guide Instruction manual Instruction manual Service manual Service manual

Contents

ENGCONNECTIONSChoose one of the three methods for connecting to a TV.Connecting the Video Out to your TV1918Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jackon your TV.METHOD 3 : Composite Video ....... (Good Quality)If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) fromthe Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video InputJacks on your TV.METHOD 2 : Component Video .... (Better Quality)METHOD 2 METHOD 3(supplied)METHOD 1Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI INjack on your TV.METHOD 1 : HDMI ....... (Best Quality)• This product operates in Interlace scan mode(480i Only ) for Component Output.• After making the video connection, set the Video input source on your TV to match the correspondingVideo output (HDMI, Component or Composite) on your Home theater.See your TV owner's manual for more information on how to select the TV's Video Input source.• If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the HomeTheater using the TV's remote control. This is only available with SAMSUNG TVs that supportAnynet+(HDMI-CEC).• Please check the logo. If your TV has an logo, then it supports the Anynet+ function.HDMI FunctionUsing Anynet+(HDMI-CEC)Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by con-necting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.MOVE ENTER EXIT• When selecting View TV, you must have a digital optical cable connected from theTV to the Home Theater listen to the TV sound through the Home Theater.• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.• Anynet+ (HDMI-CEC) will only work while in the DVD mode.In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)button on the remote control.■ Resolutions available for the HDMI output are 480p, 720p and 1080i.■ SD(Standard Definition) resolution is 480p and HD(High Definition) resolution is 720p/1080i.Resolution Selection• If the TV does not support the configured resolution, you will not be able to see thepicture properly.• When an HDMI cable is connected, composite and component video signals are not output.• See your TV owner's manual for more information on how to select the TV's VideoInput source.This function allows the user to select the screen resolution for HDMI output.1 Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable.(See page 18)2 Set the Anynet+ function on your TV.(See the TV instruction manual for more information.)■ You can operate the Home Theater by using the TV remote control.(Available TV buttons : , , , , , and , buttons, ~ button)Set the Anynet+(HDMI-CEC) function to on your TV.■ <Receiver : On> : You can listen to audio through the Home Theater.■ <Receiver : Off> : You can listen to audio through the TVSelect <THEATER to connector> and set the option of each items below.■ : If Anynet+ (HDMI-CEC) is on and you select View TV, the Home Theater willautomatically switch to DIGITAL IN.■ <THEATER Menu> : You can access the Home Theater menu.■ <THEATER Operation> : The Home Theater disc playback information will be displayed.■ <Receiver : On> : You can listen to audio through the Home Theater.■ <Receiver : Off> : You can listen to audio through the TV.If you select TVIf you select the THEATERWhy use HDMI (High DefinitionMultimedia Interface)?This device transmits a DVDvideo signal digitally withoutthe process of converting toanalog. You will get sharperdigital pictures when using anHDMI connection.With Anynet+You can operate this unit,power on your TV, or watch amovie by pressing the Playbutton on your Samsung TV'sremote control.ENTERMOVE EXITHT-X250(1~41P)-SEA 2007.3.7 6:38 PM Page 18Downloaded From TheatreSystem-Manual.com Manuals