Samsung WB151F User Manual

Also see for SMARTCAMERA WB150: User manual User manual User manual Quick start quide User manual

Appendixes 136Camera maintenance• If you reconnect the power cable when the battery is fullycharged, the status lamp turns on for approximately 30 minutes.• Using the flash or recording videos depletes the battery quickly.Charge the battery until the red status lamp turns off.• If the status lamp blinks in red, reconnect the cable, or removethe battery and insert it again.• If you charge the battery when the cable is overheated orthe temperature is too high, the status lamp may blink in red.Charging will start when the battery cools down.• Overcharging batteries may shorten battery life. After charging isfinished, disconnect the cable from your camera.• Do not bend or place heavy objects on the AC cable. Doing somay damage the cable.Notes about charging with a computer connected• Use only the provided USB cable.• The battery may not charge when:- you use a USB hub- other USB devices are connected to your computer- you connect the cable to the port on the front side of yourcomputer- the USB port of your computer does not support the power outputstandard (5 V, 500 mA)Handling and disposing of batteries and chargerswith care• Never dispose of batteries in a fire. Follow all local regulationswhen you dispose of used batteries.• Never place batteries or cameras on or in heating devices,such as microwave ovens, stoves, or radiators. Batteries mayexplode when they are overheated.