Samsung WAM5500 User Manual

Also see for WAM1500: User manual Quick setup guide How to reset User manual User manual

Contents

Symptom Check RemedyHUB doesn't work properly • Is the HUB plugged in?• Is the LAN cable connected tothe wireless router and the HUBproperly?• When the Hub is plugged in, dothe HUB's front indicators showit's operating properly?• Plug in the HUB.• Connect the LAN cable to theETHERNET SWITCH on the backof the HUB and to your wirelessrouter.• Reset the HUB. (Refer to the HUB'suser manual for details.)• If you experience troubles withconnecting the HUB and product,try relocating the product sothat the product is closer to thewireless router or HUB.Product doesn't work properly • Is the product plugged in? • Plug in the product.• Unplug the product, plug it back in,and then reconnect it to the router.• Reset the product (see page 4).Click here.• If used with a HUB- Make sure the smart device andthe HUB are connected to thesame Wi-Fi network.- Make sure the HUB's indicatorLED's show that it is workingcorrectly.- If the problem persists, reset theHUB. (Refer to the HUB's usermanual for details.)- Unplug, then plug in the HUB.Then, unplug and plug in theproduct.- If you experience troubleswith connecting the HUB andproduct, try relocating theproduct so that the product iscloser to the wireless router orHUB.NOTE9 If the problem persists, consult the service centre for troubleshooting.134444