Samsung VACUUM CLEANER Operating Instructions Manual

Contents

2IMPORTANT SAFEGUARDS1. Read all instructions carefully. Before switching on, make sure that the voltage of yourelectricity supply is the same as that indicated on the rating plate on the bottom of thecleaner.2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.Do not use to suck up water.3. This appliance is not intended for use by young persons or infirm persons withoutsupervision unless they have been adequately supervised by a responsible person toensure that they can use the appliance safely.Young children should be supervised to ensure that they do not play with the appliance.4. Do not use the vacuum cleaner without a dust bag. Replace the dust bag before it isfull in order to maintain the best efficiency.5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keepthe vacuum cleaner away from stoves and other heat sources.Heat can deform and discolour the plastic parts of the unit.6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage thecleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose.Do not block the suction or the exhaustion part.7. Switch the vacuum cleaner off at the machine before unplugging from the electricaloutlet. Do not pull on the cord to disconnect the plug from the electrical outlet. Ensurethat it is disconnected before attending to the filter.8. The plug must be removed from the socket out-let before cleaning or maintaining theappliance.9. The use of an extension cord is not recommended.10. If your vacuum cleaner is not operating correctly, switch off the power supply andconsult an authorized service agent.11. If the supply cord is damaged, it must be replaced by the manufacturer or its serviceagent or a similarly qualified person in order to avoid a hazard.12. The vacuum cleaner is provided with a self-resetting thermal cut-out which automati-cally shuts off on over-heating. Overheating can be caused by blockage in the filter,nozzle, tube or hose. After removing the cause and allowing the motor to cool, thevacuum cleaner will automatically restart.