Using the Sleep TimerSleep TimerMENU → System → Time → Sleep Timer → ENTERE• Sleep Timer: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes)✎ Use the ▲/▼ buttons to select a period of time, and then press ENTERE. To cancel the Sleep Timer, selectOff.Setting the On / Off TimerMENU → System → Time → On Timer Off Timer → ENTERE• On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2, On Timer 3)Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you selectManual, you can set up the day you want to activate the timer.The c mark indicates the day you’ve selected.Time: Set the hour and minute.Volume: Set the desired volume level.Source: To select the source of the content that will play when the TV turns on. You can:– Select TV and have the TV display a specific Terrestrial or cable channel.– Select USB and have the TV play back photo or audio files from a USB device.– Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.) that you have connected a set-top boxto, and have the TV display a channel from the set-top box.✎ The USB device must be connected to your TV before you can select USB.✎ If you select a source other than TV or USB, you must:• Have a cable or satellite set-top box attached to that source• Set the set-top box to the channel you want to watch when the TV goes on• Leave the set-top box turned on.English - 56Preference Features
