Issues Solutions and ExplanationsThe product SignalInformation is unavailable inthe Self Diagnosis menu.This function is only available for digital channels the product receives from an Aerial /RF /Coax connection.The product is tilted to theside.Remove the base stand from the product and reassemble it.The Broadcasting menu isgrayed out (unavailable).The Broadcasting menu is only available when you select the product source.Your settings are lost after5 minutes or every time theproduct is turned off.If the product is in the Store Demo mode, it will reset audio and picture settings every5 minutes. Change the settings from Store Demo mode to Home Use mode using theUse Mode procedure. Select Menu → Support → Use Mode.English - 70Other Information