Samsung T22B350ND User Manual

Also see for 3 SERIES: User manual User manual User manual Quick setup guide User manual

Contents

25EnglishBasic FeaturesSound Menu¦ Changing the Preset Sound ModeMENUm → Sound → Mode → ENTEREMode t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.¦ Adjusting sound settingsMENUm → Sound → Equalizer → ENTEREEqualizerAdjusts the sound mode.■ Balance L/R: Adjusts the balance between the right andleft speaker.■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (BandwidthAdjustment): Adjusts the level of specific bandwidthfrequencies.■ Reset: Resets the equalizer to its default settings.¦ Sound SettingsMENUm → Sound → ENTERESRS TruSurround HD (Off / On) t(standard sound mode only)This function provides a virtual 5.1 channel surround soundexperience through a pair of speakers using HRTF (HeadRelated Transfer Function) technology.Preferred Language(digital channels only)Digital-TV broadcasts are capable of simultaneoustransmission of many audio tracks (for example,simultaneous translations of the program into foreignlanguages).✎ You can only select a language among the ones beingbroadcasted.Multi-Track Sound (MTS)(analog channels only)■ Mono: Choose for channels that arebroadcasting in mono or if you are havingdifficulty receiving a stereo signal.■ Stereo: Choose for channels that arebroadcasting in stereo.■ SAP: Choose to listen to the SeparateAudio Program, which is usually aforeign-language translation.✎ Depending on the particular program being broadcast,you can listen to Mono, Stereo or SAP.Auto Volume (Off / On)To equalize the volume level on each channel, set to On.SPDIF Output✎ Only for TB350 series.SPDIF (Sony Philips Digital InterFace) is used to providedigital sound, reducing interference going to speakers andvarious digital devices such as a DVD player.Speaker Select✎ Only for TB350 series.y Speaker Select (External Speaker / TV Speaker): Asound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver.In this case, set the TV to External Speaker.✎ When Speaker Select is set to ExternalSpeaker, the volume and MUTE buttons will notoperate and the sound settings will be limited.✎ When Speaker Select is set to ExternalSpeaker.x TV Speaker: Off, External Speaker: On✎ When Speaker Select is set to TV Speaker.x TV Speaker: On, External Speaker: On✎ If there is no video signal, both speakers will bemute.Sound Reset (Reset All / Cancel)Reset all sound settings to the factory defaults.MTS