Samsung SyncMaster 400MX-2 User Manual

Also see for 320MXN - SyncMaster - 32" LCD Flat Panel Display: Brochure & specs Quick start guide User manual Control protocol

1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set valueof the selected function is displayed in the slide. When selected, each function fetches the value for the set anddisplays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in thisscreen will automatically change the mode to "CUSTOM."1) Picture PC- Available only for PC, BNC, DVI.2) Contrast- Adjusts Contrast of the selected display.3) Brightness- Adjusts Brightness for the selected display.4) Red- Adjusts red Color of the selected display.- Available only for NT.5) Green- Adjusts green Color of the selected display.- Available only for NT.6) Blue- Adjusts blue Color of the selected display.- Available only for NT.7) Color Tone- Adjusts the Color Tone for the selected display.8) Color Temp- Adjusts the Color Temp for the selected display.9) Brightness Sensor- Adjusts the Brightness Sensor for the selected display.10) Dynamic Contrast- Adjusts the Dynamic Contrast for the selected display.The Input source of MagicInfo works only on MagicInfo model.The Input source of TV works only on TV model.Color Temp is only enabled if the Color Tone is set to Off.This feature is available only for the displays whose power status is ON and if no selection is made, thefactory default is displayed.