Samsung SyncMaster 320TSn-3 User Manual

Also see for 320TSN - SyncMaster - 32" LCD Flat Panel Display: Brochure & specs User manual User manual Quick start guide

InformationFor a Better DisplayAdjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to enjoy the best picture quality. You can have anuneven picture quality on screen if the best picture quality is not provided for TFT-LCD.• Resolution: 1366 x 768• Vertical frequency (refresh rate): 60 HzTFT-LCD panels manufactured by using advanced semiconductor technologywith a precision of 1ppm (one millionth) and above is used for this product. But thepixels of RED, GREEN, BLUE and WHITE Color seem to be bright sometimes orsome of black pixels could be seen. This is not from bad quality and you can useit without any problems.• For example, the number of TFT-LCD sub pixels contained in this product are3,147,264.When cleaning the monitor and the panel outside, please apply a small amountof water to a soft cloth. Rub softly when cleaning the LCD area.If excessive forceis applied, you may stain it.If you are not satisfied with the picture quality, you can get better quality ofpicture by performing the "Auto Adjustment" function in display screen that isappeared as window termination button is pressed. If there's still noise after theautomatic adjustment, use the Fine/Coarse adjustment function.When viewing a fixed screen for an extended period of time, a residual imageor blurriness may appear. Change the mode to energy save or set a screensaverto move the picture when you need to be away from the monitor for an extendedperiod of time.PRODUCT INFORMATION (Image Retention Free)What is Image Retention ?Image retention may not occur when a LCD panel is operated under normal con-ditions.Normal conditions are defined as continuously changing video patterns. When theLCD panel is operated for a long time with a fixed pattern (over 12 hours), theremay be slight difference in voltage between electrodes that work the liquid crystal(LC) in a pixel. The voltage difference between electrodes increases with time,forcing the liquid crystal to lean. When this occurs, the previous image may be seenwhen the pattern is changed. To prevent this, the accumulated voltage differencemust be decreased.