English-36Using FLOF to Select a PageThe various topics included in the teletext pages are color-coded, andcan be selected by pressing the colored buttons on the remote control.1 Display the teletext contents page by pressing the TTX/MIX button.2 Press the coloured button corresponding to the topic that you wish toselect;the available topics are given on the status line.Result: The page is displayed with other coloured information thatcan be selected in the same way.3 To display the previous or next page, press the correspondingcoloured button.4 To display the subpage, see the following steps. Press the SUBPAGE ( ) button.Result: The available subpages appear. Select the required sub-page. Sub-pages can be scrolled by usingthe (P) or (P) button.Storing Teletext PagesYou can store up to four teletext pages to display them later at leisure.1 Select the LIST mode using the LIST/FLOF ( ) button.Result: Four 3-digit numbers are displayed in different colors.➣ The LIST/FLOF ( ) button is used to switch between theLIST and FLOF modes.2 Press the colored button corresponding to the page that will bereplaced.3 Enter the new page number using the numeric buttons.4 Repeat steps 2 and 3 for each page to be stored, using a differentcolored button each time.5 Press the (store) button until the corresponding blocks blink.HOLD DUAL I/II LIST/FLOF CANCELSLEEP SUBPAGE SIZE PIPP.SIZE PBPONTTX/MIX V.DOLBYPRE-CHEXITMUTESOURCE AUTO DISPLAY STILLP.STD S.STDPower1 2 34 5 67 8 90LOCATE-/--HOLD DUAL I/II LIST/FLOF CANCELSLEEP SUBPAGE SIZE PIPP.SIZE PBPONTTX/MIX V.DOLBYPRE-CHEXITMUTESOURCE AUTO DISPLAY STILLP.STD S.STDPowerMENULOCATE-/--PPHOLD DUAL I/II LIST/FLOF CANCELSLEEP SUBPAGE SIZE PIPP.SIZE PBPONTTX/MIX V.DOLBYPRE-CHEXITMUTELOCATE-/--