Samsung SyncMaster 2032MW User Manual

Also see for SyncMaster 2032MW: Quick start guide Service manual

Contents

dark shadows.White color is poor.Power Indicator blinks green. z The monitor is currently saving the changes made in settingsto the OSD memory.Screen is blank and powerindicator light is steady green orblinks every 0.5 or 1 secondsz The monitor is using its power management system.z press a key on the keyboardThe screen is blank and isblinking.z If you see the "TEST GOOD" message on the screen whenyou press the MENU button, check the cable connectionbetween the monitor and the computer to ensure that theconnector is properly connected.3. Problems related to AudioProblems related to audio signals and their solutions are listed below.Problems SolutionsNo sound z Ensure that the audio cable is firmly connected to both theaudio-in port on your monitor and the audio-out port on yoursound card.(Refer to the Connecting the Monitor)z Check the volume level.(Refer to the Volume)The sound level is too low. z Check the volume level.(Refer to the Volume)z If the volume is still too low after turning the control to itsmaximum, check the volume control on the computer soundcard or software program.Sound is too high pitched or toolow pitchedz Adjust the Treble and Bass to appropriate level.4. Problems related to Remote ControlProblems related to the remote control and their solutions are listed.Problems Items to checkThe remote control buttons donot respond.z Check the battery polarities (+/-).z Check if the batteries have been exhausted.z Check if the power is on.z Check if the power cord is securely connected.z Check if a special fluorescent or neon lamp is on in thevicinity.Q & AQuestion AnswerHow can I change the frequency? The frequency can be changed by reconfiguring the video card.Note that video card support can vary, depending on the version of thedriver used. (Refer to the computer or the video card manual fordetails.)How can I adjust the resolution? z Windows XP :Set the resolution in the Control Panel→Appearance andThemes→Display→Settings.z Windows ME/2000 :Set the resolution in the Control Panel→Display→Settings.