Basic functions 29Capturing photosReducing camera shake (OIS or DIS)Reduce camera shake optically or digitally in Shooting mode.Reduce camera shake with the Optical Image Stabilizer(ST77/ST79) or the Digital Image Stabilizer (ST76/ST78).S Before correction S After correction1 In Shooting mode, press [m].2 Select a OIS or DIS.3 Select an option.Icon DescriptionOff: This function is deactivated./ On: This function is activated.p s• OIS or DIS may not function properly when:- you move your camera to follow a moving subject- you use the Digital zoom- there is too much camera shake- the shutter speed is slow (for example, when you capture nightscenes)- the battery is low- you capture a close-up shot• If you use the OIS or DIS function with a tripod, your images may beblurred by the vibration of the OIS or DIS sensor. Deactivate the OIS orDIS function when you use a tripod.• If the camera is hit or dropped, the display will be blurry. If this occurs,turn off the camera, and then turn it on again.• The OIS or DIS function is not available when you set Burst options.