Samsung SSG-5100GB User Manual

Also see for SSG-5100GB: User guide User guide User manual

English-1EnglishFeaturesSamsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV.The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.✎ This product can be used only with Samsung D, E, and F series 3D TVs releasedin 2011 to 2013 or with 3D TVs that have any of the logos below. Other wirelessdevices are not compatible with this product.✎ The "Full HD 3D Glasses™" Logo signifies compatibility between display products and3D Glasses that are compliant with the "Full HD 3D Glasses™" format and doesnot indicate the picture quality of the 3D images visible using the glasses, whichdepends on the quality of the display products.Parts Components3D Active glasses(Frame body, Temples)Button Battery(CR2025)Cleaning ClothUser Guide※ For details on attaching the temples of the glasses and on the pairing method, referto page 91.Pairing 3D Active Glasses✎ What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so thatthe two devices can exchange data.✎ Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart fromeach another while pairing is in progress.✎ Once the 3D glasses are paired, the remaining battery capacity is displayed on the TVscreen. (This feature only applies to Samsung F series 3D TVs and 3D glasses that have beenlaunched since 2013.)✎ If you keep trying to do the pairing, the battery level will decrease significantly. However,the battery level will recover to a certain degree in about a minute.✎ The working distance depends on the existence of obstacles (a person, metal, walls, etc.)between the glasses and the TV or the strength of electromagnetic waves.✎ Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, thebattery lifespan decreases.3D Active GlassesSSG-5100GBUser’s Guide Turning the glasses onPress the power button briefly. Thegreen LED is turned on for 3 seconds.(Make sure that 3D is activated on theTV before using the 3D glasses.) Turning the glasses offPress the power button briefly. The redLED is turned on for 3 seconds. Performing the pairing processPress and hold the Power button. Thegreen and the red LEDs blink alternatelyfor 2 seconds.2~6m50cm Operating rangeRecommendedviewing distance2~6m(6.5 to 19.5 ft)Recommendedpairing distance50 cm or less(19.5 in)Recommended viewing distanceRecommended pairing distanceorLED Indicator& Power ButtonLiquid crystal shutterBattery Cover[NA]SSG-5100GB-00L17.indb 1 2013-01-02 8:44:54