Samsung SSA-R1003 User Manual
Also see for SSA-R1003: Quick guide
EnglisEnglish _ 11INITIALIZATIONinitializationBASIC OPERATIONSInitial State (when the power is supplied)When you apply power to the reader, it will sound a beep before entering Standby with the red indicator turned on .Using the cardPresent the card to the reader until you hear a beep and the red indicator turns green.When the reader has transferred the card data to the controller, it returns to Standbywith the red indicator turned on and waits for reading the next card.LED ControlYou can control the LED indicator of the device at your preference.Connect the LED control input line (yellow) to the NO port of the controller relay output, and GND to the COM port.Set the I/O of the controller so that you can change the color of the LED indicators. While the LED control isworking, the green indicator stays solid.This function not only enables you to change the color representing Standby from red to green, but it can be alsoapplied to make various modifications according to the different I/O settings of the controller.For more information about the I/O settings of the controller, refer to the user manual of the controller.Buzzer ControlYou can control the buzzer of the device at your preference.You can configure the I/O settings of the controller so that it sounds a beep. While the buzzer control is working, theproduct keeps sounding the beep.The controller can use the I/O settings to set the buzzer control so that it sounds an additional beep for authorizedor unauthorized access upon user authentication.Furthermore, you can make various modifications according to the different I/O settings of the controller.For more information about the I/O settings of the controller, refer to the user manual of the controller.Card reading is not available while the buzzer control is sounding the buzzer.J X Y Z[ \ ]^ _ `lzjlzjWizzhTzYWWW |
Related manuals for Samsung SSA-R1003
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved